Каталог 116 открытых хакерских плат

Этот каталог сопровождает наш обзор читателей в июне 2018 года о SBC с открытой спецификацией для хакеров.
Здесь мы предоставляем недавно обновленные описания, спецификации, цены и ссылки на детали для всех 116 SBC.

Наш обзор одноплатных компьютеров, ориентированных на хакеров в июне 2018 года, включает три ресурса: обзор последних тенденций рынка SBC;
этот каталог;
и электронная таблица документов Google, в которой приведены основные функции доски.
Наш опрос 2018 года завершен, и у нас есть победитель.
Зайдите сюда, чтобы прочитать о результатах опроса с анализом.

Каталог с кратким описанием всех 116 SBC (вы здесь)

Следующие сводные данные перечислены в альфа-порядке и основаны на спецификациях и наименьших доступных ценах, зафиксированных в последние две недели мая 2018 года, при этом продукты либо отправляются, либо доступны для предварительного заказа с ожидаемой датой поставки к концу июня.
Примечание. Резюме для SBC, которые являются новыми в этом выпуске сводки, отмечены тегом «NEW», показанным выше.
Мы также добавили краткое однострочное описание в дополнение к размерам абзаца.

86Дуино Ноль / Ноль Плюс

  • Legacy, хакерская доска x86 с низким энергопотреблением
  • Компания / проект - DM & P, 86Duino.com
  • HardLinux отчет
  • Страница продукта
  • Процессор - DM & P Vortex86EX (1x x 86 при 300 МГц)
  • Память - 128 МБ DDR3 (ноль), 1 ГБ (ноль плюс)
  • Цена - 39 долларов (ноль);
    54 доллара (ноль плюс)

Платы 86Duino на базе x86 от DM & P являются одними из самых маленьких x86 SBC, но они не обновлялись в течение некоторого времени, а посещаемость форума уменьшается.
Платы предлагают расширение, совместимое с Arduino, низкое энергопотребление и модульную конструкцию платы COM +.
Zero и Zero Plus обеспечивают 10/100 Мбит / с «Fast» Ethernet, USB 2.0 и microSD соединения, плюс 17 цифровых выводов ввода / вывода и 6 аналоговых входов.
Модель One стоимостью 69 долл. США 102 x 53 мм добавляет звук высокой четкости и дополнительные возможности ввода-вывода, а модель One Plus стоимостью 84 долл. США увеличивает объем оперативной памяти со 128 МБ до 1 ГБ.

A20-OlinuXino-Lime2

  • Зрелая, маломощная хакерская плата Arm с GbE и 160 GPIO
  • Компания / проект - Olimex, OlinuXino, Mouser
  • Страница продукта
  • Процессор - Allwinner A20 (2x Cortex-A7 @ 1 ГГц);
    Мали-400 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    дополнительная вспышка 4 ГБ eMMC, 4 ГБ NAND или 8 ГБ NAND
  • Цена - 53 доллара (45 евро);
    $ 65 (55 евро) за версию 4 ГБ

Проект OlinuXino, базирующийся в Болгарии, является одним из старейших хакерских проектов.
Его устаревший A20-OlinuXino-Lime2 предлагает Allwinner A20 с портом Gigabit Ethernet (GbE или 10/100/1000 Мбит / с), слотом microSD, портом HDMI, интерфейсом LCD и 3-мя USB-портами.
Вы также получаете поддержку батареи и 160 GPIO.
84 x 60 мм SBC доступны с ОС Android 4.2.2 или Debian Jessie с основными изображениями Linux 3.4.1.

A20-OlinuXino-Микро

  • Опциональная поддержка промышленных временных модулей и модулей расширения ввода / вывода
  • Компания / проект - Olimex, OlinuXino, Mouser
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A20 (2x Cortex-A7 @ 1 ГГц);
    Мали-400 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    опционально 4 ГБ eMMC, 4 ГБ NAND и 8 ГБ NAND
  • Цена - 65 долларов США (55 евро);
    77 долларов США (65 евро) с 4 ГБ eMMC

A20-OlinuXino-Micro имеет все входы / выходы моделей Lime первого поколения и добавляет VGA, ЖК-дисплей с сенсорной поддержкой и аудиовходы.
Эта более крупная плата 142 x 83 мм предлагает разъемы расширения с дополнительными модулями ввода / вывода.
Новые функции включают в себя версии 4 ГБ eMMC, 4 ГБ NAND и 8 ГБ NAND, а также опциональную поддержку от -45 до 85 ° C только для моделей microSD и 4 ГБ eMMC (добавьте 8 евро за любую).

A33-OlinuXino

  • Меньший и менее многофункциональный, чем другие Limes, но с более быстрым четырехъядерным процессором Allwinner A33
  • Компания / проект - Olimex, OlinuXino, Mouser
  • Страница продукта
  • Процессор - Allwinner A33 (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    опционально 4 ГБ NAND
  • Цена - 42 доллара США (36 евро) или 52 доллара США (44 евро) за версию 4 ГБ.

A33-OlinuXino имеет более быстрый четырехъядерный процессор Allwinner A33 SoC по сравнению с более ранними платами OlinuXino, но также имеет ограниченный набор функций.
Единственными реальными портами являются порт OTG mini-USB, аудиоразъемы и разъем 5В.
Два несобранных 40-контактных разъема поддерживают интерфейс GPIO, а также 1280 x 800-пиксельный ЖК-дисплей и две камеры MIPI-CSI (5- и 8-мегапиксельные).
Другие функции включают отладочный разъем, зарядное устройство LiPo и повышающий преобразователь.
71 x 66 мм SBC меньше, чем платы на основе A20 Lime и Lime2.
Вы можете скачать изображения для Android 4.4 и Debian Jesse с Linux 3.4.39.

A64-OLinuXino

  • Первый 64-битный OLinuXino
  • Компания / проект - Olimex, OlinuXino, Mouser
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A64 (4x Cortex-A53 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 1 ГБ ОЗУ DDR3 (2 ГБ на 2G16G-IND внешняя модель);
    дополнительный модуль емкостью 4 ГБ (модуль емкостью 16 ГБ на 2G16G-IND)
  • Цена - 47 долларов США (40 евро);
    59 долларов США (50 евро) за 4 ГБ eMMC;
    88 долларов США (75 евро) за 2G16G-IND

Olimex расширяется до модулей ESP32 и ноутбуков с открытым исходным кодом ( Teres-A64 ), но в июне прошлого года вернулась к SBC на базе Linux с выпуском своей первой 64-разрядной платы.
Как и Teres-A64, 90,0 x 62,5 мм A64-OLinuXino работает на Ubuntu / Linaro 4.7.3 на четырехъядерном Cortex-A53 Allwinner A64.
A64-OLinuXino доступен в трех моделях: версия 1G0G с 1 ГБ ОЗУ и без флэш-памяти, 1G4GW с 1 ГБ ОЗУ и 4 ГБ eMMC, а также 2G16G-IND с 2 ГБ ОЗУ и 16 ГБ eMMC, которая также поддерживает от -45 до 85 ° C. ,
Модель на 4 ГБ, которая до сих пор является единственной в наличии на данный момент, также единственная с WiFi и Bluetooth.
Все три модели A64-OLinuXino предлагают подключения GbE, microSD, USB 2.0, micro-USB OTG, HDMI и MIPI-DSI.
Интерфейсы, включая LCD и MIPI-CSI, доступны через 40-контактный разъем GPIO, который не претендует на совместимость с Raspberry Pi.
Другие дополнительные функции включают RTC и разъем батареи LiPo с поддержкой увеличения и зарядки.

Банановый пи БПИ-М2 Берри

  • Вариант BPI-M2 Ultra размера Raspberry Pi с встроенным интерфейсом SATA, который добавляет поддержку камеры
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner V40 (4x Cortex-A7);
    Мали-400 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - 36 долларов

Со времени нашего последнего опроса в июне 2017 года мы сняли Banana Pi BPI-M2 стоимостью 50 долларов США и другие более старые модели Banana Pi из-за их относительно высокой цены и появления нескольких более функциональных дополнений BPI-M2.
С тех пор было выпущено несколько новых моделей, включая Banana Pi BPI-M2 Berry за 32 доллара США, основанную на более ранней конструкции BPI-Ultra (см. Ниже).
Как и Ultra, Berry отличается поддержкой родного SATA.
Ягода меньше, с Raspbery Pi-like 85 x 56 мм, и имеет другой квад-A7 Allwinner SoC: камера включала Allwinner V40 вместо почти идентичного R40.
У Berry отсутствует память eMMC от Ultra, и он предлагает 1 ГБ памяти DDR3 вместо 2 ГБ.
Вместо гнезда 5 В вы получаете питание через микро-USB OTG, и вы не найдете поддержки батареи, ИК-приемника Ultra или отладки UART.
С другой стороны, Berry добавляет четвертый хост-порт USB 2.0 и разъем камеры MIPI-CSI.
Другие функции включают microSD, WiFi, Bluetooth, GbE, HDMI, MIPI-DSI и аудиоподключения, а также RPi-совместимое 40-контактное расширение.

Банановый пи BPI-M2 Magic

  • Крошечная четырехъядерная плата с MIPI-DSI и -CSI берет на себя безголовые NanoPi Neo и RPi Zero
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A33 (4x Cortex-A7);
    Мали-400 MP2 GPU
  • Память - 512 МБ оперативной памяти DDR3;
    EMMC 8 ГБ (дополнительно 16 ГБ, 32 ГБ или 64 ГБ)
  • Цена - 21 $

Доступный за 21 $ на Alibaba , Banana Pi BPI-M2 Magic, или BPI-M2M, имеет размер 51 x 51 мм, что ставит его в ту же категорию, что и крошечные платы NanoPi Neo.
BPI-M2 Magic запускает образ Debian, Ubuntu, Android или Raspberry Pi на Allwinner A33 и предлагает Wi-Fi, BT и слот microSD для расширения памяти eMMC объемом 8 ГБ и более.
Вы также получите порты USB и micro-USB OTG, а также 40-контактный разъем RPi.
Медиа-интерфейсы включают в себя MIPI-DSI и -CSI, аудиоразъем и встроенный микрофон.

Банановый пи БПИ-М2 Ультра

  • Обновление BPI-M2 добавляет родной SATA и 2 ГБ оперативной памяти
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner R40 (4x Cortex-A7);
    Мали-400 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    EMMC от 8 до 64 ГБ
  • Цена - 56 $

Banana Pi M2 Ultra (BPI-M2U) можно найти за $ 56 на Amazon .
По сути, он заменяет аналогичный 92 x 60 мм BPI-M2 и предлагает более быстрый Allwinner R40, который также поддерживает собственный разъем SATA.
Также имеется 2 ГБ оперативной памяти, что необычно для SoC Cortex-A7.
M2 Ultra дополнительно оснащен GbE, WiFi, Bluetooth, 3х USB-хостом и одним портом HDMI и micro-USB OTG.
40-контактный разъем поддерживает надстройки Raspberry Pi, и вы получаете MIPI-DSI, аудиоразъем и микрофонный интерфейс.

Банановый пи БПИ-М2 Ноль

  • Raspberry Pi Zero W псевдо клон
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner H2 + (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 512 МБ оперативной памяти DDR3
  • Цена - 21 $

Продаваемый за 21 $ на AliExpress , 60 x 30 мм Banana Pi BPI-M2 Zero имитирует Raspberry Pi Zero W, но имеет более быстрый Allwinner H2 +, который похож на Allwinner H3, но с поддержкой HD вместо поддержки видео 4K.
Набор функций практически идентичен, с WiFi, BT, MIPI-CSI, 40-контактным расширением RPi, а также портами mini-HDMI и микро-USB OTG только для питания.
Он также добавляет к смеси отладочный UART и поддерживает более широкий спектр дистрибутивов Linux и Android.

Банановый пи БПИ-М3

  • Многофункциональный 32-разрядный восьмиъядерный SBC с поддержкой SATA и расширенной поддержкой ОС
  • Компания / проект - SinoVoip
  • Страница продукта
  • Процессор - Allwinner A83T (8x Cortex-A7 при 1,8 ГГц);
    PowerVR SGX544MP1 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    EMMC от 8 до 64 ГБ
  • Цена - $ 79

SanaVoip Banana Pi M3 (BPI-M3) отсутствует во многих местах, но вы можете найти его за $ 79 на AliExpress .
Эта высококлассная плата оснащена восьмиъядерным процессором Allwinner A83T SoC, оснащенным 2 ГБ оперативной памяти и 8 ГБ eMMC.
M3 имеет примерно такой же размер (92 x 60 мм), компоновку и характеристики M2 Ultra, и аналогичным образом включает в себя RPi-ready 40-контактный канал.
Как и M2 Ultra, M3 поддерживает GbE, WiFi, SATA, 3x USB и несколько вариантов отображения и камеры.
Поддержка программного обеспечения более обширна, чем у некоторых других плат Banana Pi, хотя все они улучшились.
Варианты включают Android 5.1, Debian 8, Ubuntu 16.04 Mate, Raspbian Jesse Mate, Kano, Kali, CentOS, Gentoo, OpenSUSE, Arch, CRUX и Fedora.

Банановый пи BPI-M64

  • Первый 64-битный Banana Pi предлагает 2 ГБ оперативной памяти и 4K видео
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A64 (4x Cortex-A53 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    EMMC от 8 до 64 ГБ
  • Цена - 68 $

Только 64-битный Banana Pi от SinoVoip продается на AliExpress за 68 долларов , что дешевле, чем у Pine A64, оснащенного Allwinner A64.
С другой стороны, Banana Pi BPI-M64 загружен 2 ГБ оперативной памяти и 8 ГБ eMMC, а также многочисленными периферийными устройствами.
Вы получаете 4K-готовый HDMI, MIPI-DSI и MIPI-CSI, а также встроенные беспроводные соединения и соединения GbE.
Плата 92 x 60 мм дополнительно оснащена 3 хост-портами USB, разъемом micro-USB OTG и 40-контактным разъемом RPi.

Банановый пи BPI-W2

  • Плата роутера стоимостью менее $ 100 оснащена двумя SATA III, двумя GbE и тройными M.2
  • Компания / проект - SinoVoip
  • HardLinux отчет
  • Страница продукта
  • Процессор - Realtek RTD1296 (4x Cortex-A53 @ до 1,5 ГГц);
    Mali-T820 MP3 GPU
  • Память - 2 ГБ оперативной памяти DDR4;
    EMMC от 8 до 64 ГБ
  • Цена - 93 доллара

Banana Pi BPI-W2 созрел до зрелости в апреле на AliExpress , где он продается за 93 доллара.
Этот маршрутизатор 148 x 100,5 мм и плата NAS дают вам много по цене, включая двойной SATA III, двойной GbE и порт WAN.
Вы также получаете 4x USB, включая порты типа C и 3.0.
Для расширения есть 3 слота M.2 с поддержкой PCIe и слот для SIM-карты, а также 40-контактный разъем в стиле RPi 3.
В отличие от большинства сетевых плат, BPI-W2 также может принести его, когда речь заходит о мультимедиа: вход и выход HDMI, мини-DisplayPort и аудиоразъем.
BPI-W2 работает под управлением Android 6.0, CentOS, Debian 9, Raspbian, Ubuntu 15.04 или OpenWrt на RTD1296 Realtek, ориентированной на NAS, версии RTD1295 с мощным графическим процессором Mali-T820 MP3.

BeagleBone Black, Rev C

  • Легенда открытого исходного кода фокусируется на промышленном вводе / выводе - и сообществе
  • Компания / проект - BeagleBoard.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - TI Sitara AM3358 (1x Cortex-A8 @ 1 ГГц) с микросхемами PRU MCU;
    PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ;
    4 Гб eMMC
  • Цена - $ 55

Промышленный, ориентированный на Debian BeagleBone Black Rev C отличается многочисленными интерфейсами расширения и программируемыми микроконтроллерами «PRU», а также глубоко укоренившимся сообществом BeagleBoard.org.
SBC отсутствует на нескольких площадках, но в настоящее время он доступен по цене $ 55 в Arrow .
За BB Black последовали более функциональные и / или более дешевые клоны, которые были созданы или одобрены BeagleBoard.org.
Тем не менее, оригинал все еще занял 5-е место из 98 SBC в нашем опросе в июне 2017 года.
Далее смотрите наши отчеты о двух моделях SeeedStudio BeagleBone Green, а также о собственной BeagleBone Black Wireless BeagleBoard.org, BeagleBone Blue и новом PocketBeagle.
BeagleBone Black Industrial 4G компании Element14, которая идентична BB Black, за исключением своего конформного покрытия и поддержки от -20 до 85 ° C, похоже, отсутствует на складе.

BeagleBone Black Wireless

  • BeagleBone Black на базе SiP с поддержкой беспроводной связи и HDMI, но без Ethernet
  • Компания / проект - BeagleBoard.org;
    Октаво Системс
  • HardLinux отчет
  • Страница продукта
  • Процессор - Octavo Systems OSD3358 SiP с TI Sitara AM3358 (1x Cortex-A8 @ 1 ГГц) с микроконтроллерами PRU;
    PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ;
    4 Гб eMMC
  • Цена - 68,75 $

Компания BeagleBoard.org Octavo Systems разработала альтернативу BeagleBone Green Wireless от Seeed, аналогичным образом добавив 2,4 ГГц 802.11a / b / g / n и Bluetooth 4.1 BLE к дизайну BeagleBone Black.
В отличие от двух моделей BB Green от Seeed, беспроводная связь BeagleBone Black сохраняет порт микро-HDMI BB Black, но удаляет порт Ethernet.
В остальном он идентичен BB Black с одним большим исключением: он включает в себя модуль Octavo Systems OSD3358 SiP (system-in-package), «который объединяет функциональность BeagleBone в один простой в использовании пакет BGA», упрощая создание нестандартные варианты.
Также смотрите собственную OSD3358-SM-RED от Octavo, более продвинутую плату разработчика для того же пакета SiP.

BeagleBone Blue

  • Робототехника и сфокусированная на STEM BeagleBone с сервоприводами, датчиками и широким диапазоном мощности
  • Компания / проект - BeagleBoard.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - Octavo Systems OSD3358 SiP с TI Sitara AM3358 (1x Cortex-A8 @ 1 ГГц) с микросхемами PRU MCU и графическим процессором PowerVR SGX530
  • Память - 512 МБ ОЗУ;
    4 Гб eMMC
  • Цена - 80 долларов

Это робототехническое, ориентированное на образование сотрудничество BeagleBoard.org с координированной робототехнической лабораторией UCSD - клон BeagleBone, который добавляет управление движением и питание от батарей.
Он продается по минимальной цене 80 долларов в Arrow и Element14.
Как и BeagleBone Black Wireless, BeagleBone Blue интегрирует TI WiLink 8 с Wi-Fi и Bluetooth 4.1 LE, а также SiP-модуль Octavo Systems OSD3358, который включает в себя SoC, оперативную память и флэш-память Sitara AM3358, а также PMIC и другие функции.
Здесь нет порта Ethernet или интерфейсов дисплея, но вы получаете порты хоста и клиента micro-USB 2.0, 8 выходов серво, 4 выхода двигателя постоянного тока и 4 входа четырехканального кодера.
Другие функции включают в себя IMU, барометр, JTAG, GPS и радио DSM2.
Вы также получите вход постоянного тока 9-18 В, разъем батареи LiPo, дополнительные пользовательские кнопки и светодиоды, а также обычный обширный список интерфейсов BB Black.
В дополнение к стандартному расширенному стеку Debian в реальном времени SBC поддерживает Ubuntu Core, ROS и ArduPilot.

BeagleBone Green

  • Iagle-ориентированный клон BeagleBone с поддержкой сенсора Grove
  • Компания / проект - SeeedStudio;
    BeagleBoard.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - TI Sitara AM3358 (1x Cortex-A8 @ 1 ГГц) с микросхемами PRU MCU;
    PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ;
    4 Гб eMMC
  • Цена - 44 $

В BeedBone Black, санкционированном BeedBoard.org компанией SeeedStudio, повторном вращении BeagleBone Black не хватает порта микро-HDMI BB Black и разъема 5 В, но он стоит дешевле и добавляет разъемы расширения для датчиков Seeed Grove.
Он также заменяет порт mini-USB на микро-USB.
Помимо поддержки BeagleBoard.org, вы можете найти сайт разработчиков BB Green, ориентированный на Grove, на сайте Seeed.

BeagleBone Green Wireless

  • Беспроводная версия BeagleBone Green с 4-мя хост-портами USB
  • Компания / проект - SeeedStudio;
    BeagleBoard.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - TI Sitara AM3358 (1x Cortex-A8 @ 1 ГГц) с микросхемами PRU MCU;
    PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ;
    4 Гб eMMC
  • Цена - 52,90 $

BeagleBone Green Wireless имеет тот же базовый набор функций, что и BB Green, с идентичными добавлениями и вычитаниями из BB Black, включая добавление интерфейса Grove.
Беспроводная модель добавляет Wi-Fi и Bluetooth, а также еще три хост-порта USB на четыре, что делает его лидером среди всех клонов BB Black.
Модуль TI WiLink8 теперь является стандартным, расширяя возможности беспроводной связи до Bluetooth 4.1 LE и 2,4 ГГц 802.11a / b / g / n с 2 × 2 MIMO.
Плата стоит 52,90 долл. В Seeed и может быть найдена в Amazon по цене 47,90 долл., Хотя стоимость доставки составляет почти 20 долл.

Жевательная резинка-96

  • Самая доступная доска 96Boards CE вокруг
  • Компания / проект - uCRobotics
  • HardLinux отчет
  • Страница продукта
  • Процессор - Actions Semiconductor Actions S900 (4x Cortex-A53 @ 1,8 ГГц);
    PowerVR G6230 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    8 ГБ eMMC
  • Цена - 89 $

uCRobotics 'Bubblegum-96 - это плата с форм-фактором CE 96Boards с 2 ГБ ОЗУ.
Помимо 40- и 60-контактных разъемов расширения 96Boards, недорогой Bubblegum-96 оснащен портом HDMI, слотом microSD, портом micro-USB и двумя хост-портами USB, одним из которых является USB 3.0.
WiFi и Bluetooth также доступны.

Chameleon96

  • Плата 96Boards CE с улучшенной безопасностью, Cyclone V SE FPGA SoC и двухпотоковое видео
  • Компания / проект - Novtech, Arrow, RocketBoards.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - Intel (Altera) Cyclone V SE SoC (2x Cortex-A9);
    Циклон V FPGA с 110K LE
  • Память - 512 МБ или 1 ГБ оперативной памяти DDR3
  • Цена - $ 129

Совместимый с Novtech 96Boards CE Chameleon96 SBC доступен по цене $ 129 в Arrow .
Это первая запись 96Boards на основе FPGA, на которой Debian работает на Cyclone V SE ARM / FPGA SoC.
Хотя это заняло некоторое время, плата, наконец, была включена в официальный список 96Boards CE .
Chameleon96 отличается квантово-устойчивой безопасностью SecureRF и генерирует видео из FPGA вместо пары ядер Cortex-A9.
Его Intel Video Suite для технологии FPGA может воспроизводить потоки 1080 кадров со скоростью 60 кадров в секунду через порт HDMI и кодировать аналогичное видео с помощью двухполосного интерфейса камеры MIPI-CSI.
Другие функции включают в себя слот microSD, порт micro-USB OTG, два хост-порта USB 2.0, аудиоинтерфейс, USB Blaster и UART.
Как и большинство 96Boards SBC, этот 12В SBC не имеет Ethernet, но оснащен WiFi и Bluetooth.
Он предлагает обычные 96Boards низко- и высокоскоростные разъемы ввода / вывода.

Chip Pro Dev Kit

  • Беспроводная хакерская плата включает в себя два модуля Chip Pro
  • Компания / проект - Next Thing Co.
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner / Next Thing GR8 (1x Cortex-A8 @ 1 ГГц);
    Мали-400 GPU
  • Память - 256 МБ или 512 МБ оперативной памяти DDR3 (SiP);
    512MB NAND flash
  • Цена - 49 $

Чип SBC за 9 долларов отсутствовал более года, и, как и в прошлый раз, когда мы проверяли, он все еще возвращается «скоро» с новой открытой спецификацией Next Thing - GR8 SiP - Allwinner R8 SoC.
В то же время вы можете приобрести набор для чипсета Chip Pro Dev Kit, который поставляется с двумя компьютеризированными модулями Chip Pro на базе GR8, которые объединяют 802.11b / g / n и Bluetooth 4.2 BLE.
Один из этих чипоподобных модулей припаян на плате, а другой включен отдельно.
Базовая плата оснащена хост-портом USB 2.0, портом micro-USB с поддержкой UART, аудиоразъемом и двумя микрофонами.
Вы также получаете 6–23 В постоянного тока и 3,7 В батареи LiPo, а также интерфейсы PWM, UART и GPIO.
В комплект входят мини-макет, перемычки, разъемы и антенна WiFi.
Поддержка Mainline Linux доступна в Buildroot и Debian.
Next Thing также продает чипсет PocketChip стоимостью $ 69 с 4,3-дюймовым сенсорным экраном и клавиатурой.

CloudBit

  • Миниатюрная минималистичная плата IoT ARM9 позволяет добавлять модули LittleBits
  • Компания / проект - LittleBits Electronics
  • HardLinux отчет
  • Страница продукта
  • Процессор - NXP i.MX233 (1x ARM9 @ 454 МГц)
  • Память - 64 МБ ОЗУ;
    Карта памяти microSD 4 ГБ
  • Цена - 60 долларов

Одинокая Linux-плата на Arduino-ориентированной платформе производителя LittleBits является одним из самых маленьких SBC с разрешением 15 x 10 мм.
CloudBit объединяет WiFi, порт micro-USB только для питания и два разъема «BitSnap» для добавления стандартных модулей LittleBits, шесть из которых поставляются в комплекте за 90 долларов.
Платформа на базе Arch Linux поддерживает сценарии IFTTT и подключается к облачной платформе, ориентированной на Node.js, предназначенной для мониторинга вещей IoT.
Это единственная в обзоре плата с процессором, основанным на древней архитектуре ARM9 с низким энергопотреблением.

CubieAIO-A20

  • Эта многослойная плата, сочетающая в себе функции высокого класса и низкоуровневую SoC, имеет обширную поддержку USB и последовательных интерфейсов.
  • Компания / проект - CubieBoard.org, CubieTech Limited
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A20 (2x Cortex-A7 @ до 1 ГГц);
    Мали-400 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    Флэш-память 8 ГБ, расширяемая до 32 ГБ (eMMC) или 64 ГБ (TSD)
  • Цена - 83 $

Как и теперь вышедший на пенсию CubieBoard 3, CubieAIO-A20 построен на базе Allwinner A20 SoC.
Цена упала в последние месяцы до 83 долларов на Amazon .
CubieAIO-A20 отличается широким температурным диапазоном от -20 до 70 ° C и широкой поддержкой USB и последовательных входов / выходов.
Он оснащен 6x хост-портами USB 2.0, микро-USB OTG и двойными последовательными разъемами UART DIN, которые поддерживают до 6-кратных последовательных портов через расширение.
Плата типа «сэндвич» объединяет 75x50 мм Einstein-A20 COM от CubieTech, который оснащен WiFi, Bluetooth 4.0, RTC, 200-контактным расширением и собственным портом micro-USB.
COM и SBC поддерживают те же дистрибутивы Linux и Android, что и на CubieBoard 2 и 3. Оператор 172 x 106 мм CubieAIO-A20 предлагает порт GbE, а также два слота mini-PCIe с поддержкой mSATA и 3G / 4G. модули соответственно.
Также есть слот для SIM-карты и антенны для стандартного модуля WiFi / BT.
Другие функции включают microSD, ИК, HDMI, VGA, SPDIF, 3,5 мм аудио и 54-контактный интерфейс расширения.
CubieAIO-A20 также продается в виде мини-ПК в корпусе All-in-One со встроенным 7-дюймовым емкостным сенсорным дисплеем 1024 x 600, доступным по цене $ 127.80 на AliExpress .

CubieAIO-S700

  • Версия с турбонаддувом CubieAIO-A20, которая переходит на квадроцикл -A53 Actions S700
  • Компания / проект - CubieBoard.org, CubieTech Limited
  • HardLinux отчет
  • Страница продукта
  • Процессор - CubieTech Actions S700 (4x Cortex-A53);
    Мали-450 MP4 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    8 ГБ eMMC
  • Цена - 139 $

В июле прошлого года CubieTech стал официальным дистрибьютором подразделения обработки приложений компании Actions Technology, а затем анонсировал несколько основанных на действиях SBC с открытым исходным кодом.
CubieAIO-S700 в стиле «сэндвич» оснащен Quad-A53 Actions S700 через модуль Einstein-S700 CubieTech, который интегрирует чип Ampak AP6212 с WiFi-AC и BT 4.0.
Помимо другого процессорного модуля Einstein, плата очень близка по характеристикам и компоновке к CubieAIO-A20 на базе Allwinner.
170 x 106-миллиметровый SBC имеет высокий 20-миллиметровый профиль благодаря 6-кратным двойным стекам хост-портов USB 2.0.
Порт HDMI имеет высшее разрешение с разрешением HD, но вы получаете порт GbE, аудио SPDIF, два последовательных порта на береговой линии, слот для SIM-карты и два слота mini-PCIe, один из которых не имеет встроенного mSATA.
CubieAIO-S700 также имеет 54-контактный разъем расширения, RTC, IR и многое другое.
Полный комплект CubieAIO-S700 продается за 139 долларов на AliExpress .
CubieTech также опубликовал детали для CubieAIO-S500 SBC, который почти идентичен CubieAIO-S700, но имеет модуль Einstein S500 с четырьмя -A9 Actions S500 SoC.
Плата еще не дошла до рынка.

CubieBoard4

  • Многофункциональная восьмиъядерная плата -A15 с несколькими вариантами хранения
  • Компания / проект - CubieBoard.org, CubieTech Limited
  • HardLinux отчет
  • Страница продукта
  • Процессор - Allwinner A80 (4x Cortex-A15 @ до 2 ГГц, 4x Cortex-A7 @ до 1,3 ГГц);
    PowerVR G6230 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    EMMC 8 ГБ, расширяемый до 64 ГБ
  • Цена - $ 119

CubieBoard4 оснащен восьмиъядерным процессором Allwinner A80 SoC и 64-ядерным графическим процессором PowerVR G6230.
111 x 111 мм SBC предлагает порты WiFi, Bluetooth и GbE, а также порты VGA, HDMI, USB 3.0 и 4x USB 2.0.
Есть также 54-контактный разъем расширения.
SBC предоставляет дополнительные конфигурации, включая два слота microSD или сочетание microSD и встроенной флэш-памяти.
Существует множество кейсов и других дополнений, а также изображений для Debian, Linaro Ubuntu и Android, с поддержкой mainline Linux.
В Eleduino плата стоит $ 119 .

CubieBoard5 (CubieTruck-Plus)

  • Плата Octa-core -A7 с поддержкой SATA и двумя дисплеями
  • Компания / проект - CubieBoard.org, CubieTech Limited
  • Страница продукта
  • Процессор - Allwinner H8 (8x Cortex-A7 @ до 2 ГГц);
    Графический процессор PowerVR SGX544 @ до 700 МГц
  • Память - 2 ГБ оперативной памяти DDR3
  • Цена - $ 99

CubieBoard5 демонстрирует Allwinner H8 с восемью ядрами Cortex-A7.
SBC предоставляет хранилища microSD и SATA с дополнительной платой RAID.
Для подключения вы получаете WiFi, Bluetooth 4.0 и порт GbE.
Поддержка двух дисплеев доступна через порты HDMI и DisplayPorts.
Вы также получите пару хост-портов USB, а также ИК-датчик, аудио S / PDIF и дополнительную литиевую батарею.

CubieBoard6 / CubieBoard7

  • Монолитные двоюродные братья к платам CubieAIO в стиле сэндвич с более быстрым SATA и USB 3.0
  • Компания / проект - CubieBoard.org, CubieTech Limited
  • HardLinux отчет
  • Страница продукта
  • Процессор - CubieBoard6: CubieTech Actions S500 (4x Cortex-A9 при 1,2 ГГц, графический процессор PowerVR SGX544);
    CubieBoard7: CubieTech Actions S700 (4x Cortex-A53, Mali-450 MP4 GPU)
  • Память - 2 ГБ ОЗУ LPDDR3;
    8 ГБ eMMC
  • Цена - 79 долларов (CubieBoard6);
    98 долларов (CubieBoard7)

Новые SBC CubieBoard6 и CubieBoard7 , которые идентичны, за исключением своих процессоров, являются монолитными двоюродными братьями CubieAIO-S500 и CubieAIO-S700 в стиле «сэндвич», соответственно.
Эти обновления для четырехлетней CubieBoard2 имеют меньшие размеры 100 х 60 мм по сравнению с платами CubieAIO, а также меньший набор функций.
Ключевое преимущество в дополнение к их более низким ценам состоит в том, что их не родные порты SATA в сочетании с более быстрым соединением USB 3.0 предлагают SATA III.
Платы обеспечивают 10/100 Ethernet, 802.11n и BT 4.0, а также 2 хост-порта USB 2.0 и порт mini-USB.
Другие функции включают HD-ready HDMI, аудиоразъемы, RTC, IR, разъем UART и два 48-контактных разъема расширения.
Как и платы CubieAIO, они поддерживаются оптимизированными для действий Android 5.1.1 и сборками Debian.
CubieBoard6 продается на Eleduino за 79 долларов , а CubieBoard7 на Amazon стоит 98 долларов .

Комплект для разработки DE0-Nano-SoC

  • Особенности платы разработчика Поддержка CyCone V SE FPGA SoC и Arduino
  • Компания / проект - Terasic;
    RocketBoards.org
  • Страница продукта
  • Процессор - Intel Cyclone V SE (Cyclone V FPGA + 2x Cortex-A9 @ 952 МГц)
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - $ 99

Комплект разработки DE0-Nano-SoC выглядит как коммерческая доска для разработки, но он предлагает открытые спецификации и поддерживается на сайте сообщества RocketBoards.org .
В DE0-Nano-SoC используется нижняя часть SE Cyclone V SoC от Intel, которая примерно эквивалентна Xilinx Zynq-7020.
SoC также сочетает в себе схемы FPGA с двумя ядрами Cortex-A9, работающими под управлением Angstrom v2014.12 Yocto 1.7 с ядром Linux 4.0.
Плата имеет порты GbE, USB OTG и micro-USB, а также слот microSD с картой данных 4 ГБ.
Также имеется акселерометр, расширительный разъем, связанный с Arm, и множество интерфейсов, связанных с FPGA, включая 40-контактный разъем и экранирующий разъем Arduino.
(Существует также идентичный вариант «Atlas-SoC», который предназначен для разработчиков программного обеспечения, а не разработчиков аппаратного обеспечения.)

DragonBoard 820c

  • Высокопроизводительная замена DragonBoard 410C на 96Boards CE Extended и Snapdragon 820E
  • Компания / проект - Terasic;
    RocketBoards.org
  • HardLinux отчет
  • Страница продукта
  • Процессор - Qualcomm Snapdragon 820E (2 ядра Kyro при 2,35 ГГц, 2 при 1,6 ГГц);
    Графический процессор Adreno 530 и др.
  • Память - 3 ГБ ОЗУ LPDDR4-1866;
    32 ГБ UFS 2.0
  • Цена - $ 199 с бесплатной доставкой

Мы наконец удалили DragonBoard 410C, которого уже давно нет в наличии.
Теперь его сменил Arrow's DragonBoard 820c, который переходит от Snapdragon 410 к более мощному Snapdragon 820E.
Как и оригинальная DragonBoard, это плата 96Boards Consumer Edition (CE), но в ней используется расширенная версия (100 x 85 мм).
В дополнение к стандартным 40-контактным низкоскоростным и 60-контактным высокоскоростным разъемам CE расширенный формат обеспечивает второй высокоскоростной 60-контактный разъем с 4L-MIPI DSI, последовательным интерфейсом SSC и TSIF, а также предоставляет отдельный аналоговый аудио заголовок.
Плата основана на форм-факторе Extended CE, eInfochips SD 600eval, оснащенном Snapdragon 600, который Arrow выпустил в качестве прототипа под названием DragonBoard 600c.
DragonBoard 820c был представлен как часть многоплатной инициативы 96Boards.ai от Linaro.
В этом случае AI активируется через Spectra ISP Snapdragon 820E, который поддерживает управляемый Linux SDK Snapdragon с движком под управлением Linux.
DragonBoard 820c оснащен 3 ГБ оперативной памяти LPDDR4-1866, 32 ГБ хранилища UFS 2.0 UFS, HDMI 2.0, 2x USB 3.0 и портом micro-USB OTG.
В дополнение к порту GbE вы получаете WiFi-AC, BT 4.2, GPS, IMU, магнитометр и источник питания широкого диапазона.
Тем временем Geniatech работает над собственной платой 96Boards Snapdragon 820E под названием Developer Board 8 .

Светлячок-RK3128

  • Многофункциональная сэндвич-доска с выдержкой Rockchip SoC получает большую скидку
  • Компания / проект - Firefly
  • Страница продукта
  • Процессор - Rockchip RK3128 (4x Cortex-A7 при 1,3 ГГц);
    Мали-400 MP2 GPU
  • Память - 1 ГБ ОЗУ;
    8 ГБ NAND вспышка
  • Цена - 60 долларов

В июне прошлого года мы удалили Firefly-FirePrime S, потому что он больше не был доступен, без обещания возврата.
Но он вернулся, по крайней мере сейчас, с новым именем (Firefly-RK3128) и гораздо более низкой рекламной ценой в 60 долларов .
Эта же плата указана как «в настоящее время недоступная» на Amazon под названием «Firefly RK3128 FirePrime». Firefly-RK3128 с двойной загрузкой Android 5.1 и Ubuntu 15.04 на четырехъядерном чипе -A7 Rockchip, который работает медленнее, чем RK3288, и предлагает половину Оперативная память и вспышка Firefly-RK3288.
Устройство COM / baseboard в стиле «сэндвич» включает в себя GbE, WiFi, BT, HDMI, MIPI-DSI, MIPI-CSI, SPDIF, аналоговое аудио, LVDS, IR и CVBS.
Плата 117 x 85 мм дополнительно оснащена 4 хост-портами USB, OTG-портом micro-USB и двумя 42-контактными разъемами расширения.

Светлячок-RK3288

  • Плата Quad-A17 с встроенным беспроводным интерфейсом и поддержкой 4K HDMI 2.0
  • Компания / проект - Firefly
  • Страница продукта
  • Процессор - Rockchip RK3288 (4x Cortex-A17 при 1,8 ГГц);
    Mali-T760 GPU
  • Память - 2 ГБ оперативной памяти DDR3 с возможностью расширения до 4 ГБ;
    16 ГБ eMMC расширяется до 32 ГБ
  • Цена - 119 долларов США (2 ГБ / 16 ГБ);
    189 долларов США (4 ГБ / 32 ГБ)

Начиная с 119 $ , эта двойная загрузка SBC 118 x 85 мм Ubuntu 14.04 и Android 4.4 с поддержкой основной версии Linux 4.4 на 1,8 ГГц, Quad-A17 RK3288 с графическим процессором Mali-T760.
Firefly-RK3288 имеет порт HDMI 2.0, который может выводить до 4Kx2K при 60 Гц.
Плата предлагает двухдиапазонный 802.11ac, Bluetooth 4.0, порт GbE и 3 порта USB и дополнительно оснащена соединениями VGA, LVDS, eDP, MIPI-DSI, MIPI-CSI, S / PDIF, последовательной отладкой и IR ,
Больше ввода / вывода доступно через двойные 42-контактные разъемы.
Пульт дистанционного управления «Fireasy» WiFi, а также сенсорные экраны, вентиляторы и камеры не являются обязательными.

Firefly-RK3288 Перезагрузить

  • Версия Firefly-RK3288 в сэндвич-стиле добавляет SATA, вход HDMI и другие USB и GPIO
  • Компания / проект - Firefly
  • HardLinux отчет
  • Страница продукта
  • Процессор - Rockchip RK3288 (4x Cortex-A17 при 1,8 ГГц);
    Mali-T760 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    16 ГБ eMMC
  • Цена - 159 $

Firefly-RK3288 Reload имеет ту же поддержку SoC и ОС, что и Firefly-RK3288, но переделан как COM / основной платы типа сэндвич.
Плата 178 x 117 мм подключается к COM 82 x 60 мм через 314-контактный разъем MXM.
Перезагрузка предоставляет все функции Firefly-RK3288 и добавляет второй выход HDMI, новый вход HDMI и второй интерфейс DVP для 5-мегапиксельной камеры в дополнение к 13-мегапиксельному DVP-ready.
Перезагрузка также добавляет порт SATA, третий USB-хост и OTG micro-USB и увеличивает контакты расширения до 184. В прошлом году COM перезагрузки стал отдельно доступным как Firefly-RK3288 перезарядки CoreBoard за 105 $, который появился в Платформа для разработки «все в одном» размером 189 x 107 мм под названием AIO-3288J .
AIO-3288J не имеет порта SATA для перезагрузки и имеет два порта HDMI вместо трех, однако он предлагает больше встроенных интерфейсов.
Он также продается по более низкой цене в 139 долларов , включая CoreBoard.

Светлячок-RK3399

  • Хакерская плата Powerhouse на базе RK3399 с портами M.2, mini-PCIe и двумя 4K-дисплеями
  • Компания / проект - Firefly
  • HardLinux отчет
  • Страница продукта
  • Процессор - Rockchip RK3399 (2x Cortex-A72 @ до 2,0 ГГц, 4x Cortex-A53 до 1,42 ГГц);
    Mali-T860 GPU
  • Память - 2 ГБ или 4 ГБ оперативной памяти DDR3;
    16 ГБ eMMC (4 ГБ / 128 ГБ для макс.)
  • Цена - 149 долларов США (2 ГБ) или 209 долларов США (4 ГБ);
    Макс 259 долларов

С Firech RK3399 с двумя ядрами Cortex-A72, 4x-A53 и Mali-T860 Firefly-RK3399 является одной из самых мощных хакерских плат в мире.
Начиная с $ 149 , он предлагает более широкие возможности, чем более дешевый Vamrs Rockchip RK3399 Sapphire (см. Ниже).
Версия Firefly-RK3399 Max стоимостью 259 долларов США оснащена eMMC емкостью 128 ГБ.
Обе модели предоставляют слот microSD и слот M.2, которые можно использовать для SSD.
Другие функции включают в себя порт GbE, двухдиапазонный 802.11b / g / n / ac, Bluetooth 4.1 BLE, слот для SIM-карты и слот mini-PCIe, который может загружать дополнительный модуль LTE.
Порты DP и HDMI поддерживают видео до 4K при 60 Гц, и вы получаете MIPI-DSI, eDP, DVP, IR и 2x MIPI-CSI.
Firefly-RK3399 предлагает 2 порта USB 3.0 (включая Type-C), 2 порта USB 2.0, 42-контактный разъем расширения и множество аудио-опций.
Плата с двойной загрузкой Android 6.0.1 и Ubuntu 16.04.
В сентябре прошлого года Firefly выпустила COM-версию Firefly-RK3399 для системной платы RK3399.
CoreBoard теперь доступен в виде AIO-3399J в виде сэндвича, плата за 165 долларов .
Это очень похоже на перезагрузку Firefly-RK3288 с процессором CoreBoard AIO-3288J (см. Выше).
VideoStrong offers an OEM variant of the Firefly-RK3399 starting at $250 called the VS-RD-RK3399 .

Firefly-ROC-RK3328-CC (Renegade)

  • RK3328-based Raspberry Pi clone built by Libre Computer
  • Company/project — Firefly, Libre Computer
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3328 (4x Cortex-A53 @ 1.5GHz); Мали-450 MP2 GPU
  • Memory — 1GB, 2GB, or 4GB DDR4; empty eMMC slot
  • Price — $35 (1GB), $50 (2GB), $80 (4GB)

Firefly's Firefly-ROC-RK3328-CC is the new name of Libre Computer's Renegade SBC, which launched on Indiegogo a year ago. Like Pine64's Rock64 SBC (see farther below), this is an RK3328-based Raspberry Pi clone with an RPi 3-like footprint, layout, 40-pin interface, and very similar features. The main difference from the Raspberry Pi 3 is the lack of WiFi, Bluetooth, and MIPI-CSI and -DSI, and the presence of 3x USB host ports instead of four. Like the Rock64, however, the third port is USB 3.0. Also like the Rock64, you get GbE instead of 10/100 Ethernet, and HDMI 2.0 with 4K instead of an HD-only HDMI 1.4. There's also an IR receiver, plus DDR4 RAM at up to 4GB and an eMMC slot. Firefly and Bay Libre assisted Libre Computers with software support, which includes Android 7.1 and Ubuntu 16.04, with the latter offering a choice of Rockchip's Linux 4.4 Kernel and Mainline Linux 4.14 LTS. Libre also sells an Amlogic based Le Potato SBC (see below).

HiKey

  • World's first 96Boards board
  • Компания / проект - LeMaker
  • HardLinux report
  • Страница продукта
  • Processor — HiSilicon Kirin 6220 (8x Cortex-A53 @ 1.2GHz); Mali 450-MP4 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    8 ГБ eMMC
  • Price — $140

The octa-core HiKey was the flagship 96Boards Consumer Edition form factor SBC. It's in limited stock at Amazon with 2GB, and the 1GB version is no longer available. The board features the 96Boards standard 40- and 60-pin connectors, plus WiFi, Bluetooth, HDMI, MIPI-DSI, and three USB ports. The HiKey is supported by Linaro Debian Linux from a mainline Linux 4.4.1 kernel, as well as Linaro/AOSP Android 7.0. Last year, LeMaker and ArcherMind launched a 96Boards CE compatible Hikey 960 SBC using HiSilicon's quad -A73, quad -A53 Kirin 960 SoC, but it's over our limit at $239. In April of this year, Lenovator launched LeMaker's 96Boards CE Extended “HiKey 970” SBC, but it's even farther over the limit at $299. The HiKey 970 features an octa-core Kirin 970 SoC, 6GB LPDDR4, 64GB UFS storage, wireless, GbE, M.2, and CAN.

HummingBoard-Edge

  • Industrial-minded, sandwich-style i.MX6 board with wide-range power and optional -40 to 85°C
  • Компания / проект - SolidRun
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Solo, DualLite, Dual, or Quad (1x, 2x, 2x, or 4x Cortex-A9 @ up to 1.2GHz); Vivante 2D/3D GPU
  • Memory — Solo (512MB), DualLite and Dual (1GB), and Quad (2GB or 4GB) DDR3 RAM; 4GB eMMC plus optional eMMC or NOR flash on MicroSOM
  • Price — $126 to $241

Like all the HummingBoards except for the new i.MX8M based HummingBoard Pulse, the HummingBoard-Edge is a sandwich-style board that incorporates i.MX6 based MicroSOM modules. In Oct. 2016, SolidRun released revised MicroSOM 1.5 versions of the COMs, which can also be bought separately. The rev 1.5 MicroSOMs add improved FlexCAN and TI WiLink8 wireless, as well as optional eMMC and NOR flash up to 8GB. The 102 x 69mm HummingBoard-Edge duplicates all the features of the smaller HummingBoard-Pro and doubles the USB 2.0 count to four. It also adds M.2, SIM, and MIPI-DSI connections. In addition, it provides a larger 36-pin GPIO connector, boosts the power supply to a wide-range 7-36V, and adds optional onboard eMMC. As with the Pro, there are numerous options including wireless modules and 4GB of RAM. The models are available in three temperature ranges including -40 to 85°C.

HummingBoard-Gate

  • Stripped down version of HummingBoard-Edge that adds MikroBus socket for Click modules
  • Компания / проект - SolidRun
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Solo, DualLite, Dual, or Quad (1x, 2x, 2x, or 4x Cortex-A9 @ up to 1.2GHz); Vivante 2D/3D GPU
  • Memory — Solo (512MB), DualLite and Dual (1GB), and Quad (2GB or 4GB) DDR3 RAM; optional eMMC or NOR flash
  • Price — $96 to $226

As the name suggests, the HummingBoard-Gate is designed primarily for IoT gateway duty. The SBC lacks HummingBoard-Edge features like LVDS, analog audio, or eMMC and M.2 storage. Otherwise, it's almost identical, with the same 102 x 69mm footprint, 7-36V power supply, mini-PCIe slot, and optional wireless modules and metal enclosure. Its major new offering is a MikroBus socket that accepts MikroElektronika's 200-plus Click add-on I/O and sensor modules. Multiple temperature ranges are available.

HummingBoard-Pro

  • Updated version of flagship HummingBoard with mini-PCIe and mSATA
  • Компания / проект - SolidRun
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Solo, DualLite, Dual, or Quad (1x, 2x, 2x, or 4x Cortex-A9 @ up to 1.2GHz); Vivante 2D/3D GPU
  • Memory — Solo (512MB), DualLite and Dual (1GB), and Quad (2GB) DDR3 RAM; optional eMMC or NOR flash
  • Price — $96 to $197

The HummingBoard-Pro is an updated version of the apparently discontinued HummingBoard-Base with the new MicroSOM v1.5 modules. It's identical to the HummingBoard-Base except that it adds mini-PCIe, mSATA, LVDS, analog audio, RTC, and IR. It also offers two more internal USB headers. Options on both models include microSD slots, a wireless module, a power adapter, and a custom enclosure.

HummingBoard Pulse

  • Powerhouse i.MX8M board with mini-PCIe, M.2, HDMI 2.0, and dual GbE ports
  • Компания / проект - SolidRun
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX8M Dual or Quad (2x or 4x Cortex-A53 @ 1.3GHz to 1.5GHz); Cortex-M4 MCU; Vivante GC7000 Lite GPU
  • Memory – Dual (2GB or 3GB LPDDR4-3200); Quad Lite (2GB or 4GB); Quad (2GB or 4GB); optional eMMC or NOR flash
  • Price — $160 (Dual), $170 (Quad Lite), $185 (Quad)

The HummingBoard Pulse opened for pre-orders in March, with shipments due in early June. The board advances to the 64-bit i.MX8M SoC via new i.MX8 SOM modules available in Dual, Quad Lite, or Quad versions. The Quad Lite has the same quad -A53 cores as the Quad and is “Lite” only in its lower default RAM allotment. The HummingBoard Pulse carrier is a bit larger than the first-gen HummingBoards at 102 x 69mm, and it replaces the GPIO expansion interfaces in favor of single mini-PCIe, M.2, and SIM-Card slots. Like the HummingBoard-Gate, it also provides a Mikrobus connector for adding Click modules. The Pulse is notable for its dual GbE ports. Other features include 2x USB 3.0, USB Type-C, and HDMI 2.0 ports. You also get an RTC, IR receiver, 7-36V input, a heatsink, and an optional metal enclosure. Software support has yet to be detailed, but Linux is a given. See also Wandboard.org's Wand-Pi-8M farther below.

Khadas Vim Pro

  • 64-bit Amlogic based board focuses on video
  • Company/project — Khadas
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S905X (4x Cortex-A53 @ up to 2GHz); Мали-450 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    16 ГБ eMMC
  • Price — $60 (discounted from $90)

Chinese startup Khadas debuted its media-oriented Khadas Vim (Vim1) in late 2016 and has since shipped a more advanced Vim2 model (see below). The 82 x 58mm Vim adopts the Amlogic S905X, a lower-cost upgrade to the quad-core, -A53 Amlogic S905 found on the Odroid-C2. The Vim1 supports Android 6.0 with Kodi-17, as well as Ubuntu 16.04, Buildroot, and 7.0 versions of the Kodi-oriented OpenELEC/LibreELEC. Only the Pro version is still available, and on discount, but the joint shopping page for the Vim1 and Vim2 also says “sold out.” The Vim Pro offers 802.11ac WiFi, Bluetooth 4.2, Fast Ethernet, and 3x USB 2.0 host ports, one of which is a Type C OTG port with power support. Other features include HDMI 2.0a, IR, microSD, and 40-pin expansion (but with no claims of RPi support). Shipping is free to the US Khadas recently launched a $99 Khadas Tone Board audio add-on for both the Vim1 and Vim2.

Khadas Vim2

  • Advanced, octa-core version of Vim1 with GbE and Pogo Pad controllers
  • Company/project — Khadas
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S912 (8x Cortex-A53 @ up to 1.5GHz); Mali-T820 MP3 GPU
  • Memory — 2GB (Basic) or 3GB (Pro, Max) DDR4 RAM; 16GB (Basic), 32GB (Pro), or 64GB (Max) eMMC
  • Price — $90 (Basic), $110 (Pro), $130 (Max)

Khadas sells the new Vim2 on the same Geekbuying page where it offers the original Vim1. Both are temporarily sold out. The Vim2 has the same 82 x 58mm footprint as the Vim1, but advances to an octa-core Amlogic S912 with a high-end Mali-T820 GPU. Software support is similar except that the Vim2 moves to Android 7.1. The Basic, Pro, and Max models differ only in their memory complements and their versions of WiFi and Bluetooth. The Max features 2×2 MIMO WiFi-ac with RSDB (Real Simultaneous Dual Band). Like the original, the board is equipped with HDMI 2.0a with 4K @ 60Hz decoding, 2x USB 2.0, a micro-USB OTG Type-C with 5V input, and a 40-pin expansion connector. The Vim2 advances to GbE with WoL and adds an FPC link and two Pogo Pad I/O connectors, one of which controls an STM8S003 MCU for a programmable EEPROM. Other features include microSD, RTC, IR, and an acrylic case.

LeMaker Guitar

  • The typical mid-range Arm hacker SBC…if you lived in 2016
  • Компания / проект - LeMaker
  • Страница продукта
  • Processor — Actions S500 (4x Cortex-A9 @ up to 1.6GHz); PowerVR SGX544 GPU
  • Memory — 1GB or 2GB DDR3 RAM; 8 ГБ eMMC
  • Цена - $ 69

LeMaker's sandwich-style Guitar SBC integrates a COM with a quad-core Actions S500. Images are available for Android 5.0, Ubuntu Mate, Ubuntu Core, Lemuntu, Armbian, ArchLinux, and a LeMaker XBMC (Kodi) media playing variant called LeMedia . The 88 x 81mm baseboard offers WiFi, Bluetooth, Ethernet, HDMI, micro-USB 3.0, and dual USB host ports. There's also a MIPI-CSI interface and RPi-compatible 40-pin connector.

Libre Computer Board (Le Potato)

  • RPi 3 lookalike that adds HDMI 2.0 and optional eMMC
  • Company/project — Libre Computer
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S905X (4x Cortex-A53 @ up to 2GHz); Мали-450 MP2 GPU
  • Memory — 1GB or 2GB DDR3 RAM; optional 8GB to 64GB eMMC
  • Price — $35 (1GB) or $45 (2GB)

After supplying its Kickstarter backers with the Raspberry Pi-like Le Potato, Libre Computer is now selling the SBC at LoverPi as the Libre Computer Board (AML-S905X-CC). It's equipped with the same quad -A53 S905X SoC found on the original Khadas Vim, and has the same size, port layout, and basic feature set as the Raspberry Pi 3, including 4x USB host ports, Fast Ethernet, and 40-pin expansion. There's no WiFi/BT, but you get optional eMMC, IR, and an ADC + I2S header, and the HDMI port is upgraded to 2.0 with 4K. The board ships with schematics and source code for Linux 4.14 LTS, Buildroot with Linux 4.9, Armbian Debian and Ubuntu, LibreELEC 9, and Android builds up to 8.0 (Oreo) . Libre also created an RPi-like Renegade SBC with a Rockchip RK3388 that is sold by Firefly as the Firefly-ROC-RK3328-CC (see above). The company has also launched an Allwinner H2+/H3 based RPi clone called the Tritium (see farther below).

LinkIt Smart 7688

  • Tiny, wireless-enabled. MIPS-based SBC with Grove add-on support
  • Company/project — MediaTek Labs, SeeedStudio
  • HardLinux report
  • Страница продукта
  • Processor — MediaTek MT7688AN (1x MIPS core @ 580MHz); Atmel ATmega32U4 MPU (Duo only)
  • Memory — 128MB RAM; 32 МБ флэш
  • Price — $14.90 or $17.90 (Duo)

MediaTek Labs' miniscule, SeeedStudio-built LinkIt boards run OpenWrt on a 580MHz MIPS SoC, and target IoT endpoints and gateways. The $15 model measures 56 x 26mm, and offers WiFi, microSD, and dual micro-USB ports, while the $18, 61 x 26mm LinkIt Smart 7688 Duo , which is currently on backorder, adds an MPU for Arduino support. The boards provide GPIO, I2C, SPI, UART, PWM, and Fast Ethernet, plus I2S audio on the base model and ADC and SPI on the Duo. SeeedStudio offers an optional breakout board for the standard LinkIt and provides three options for the Duo: breakouts for Arduino and Grove sensors and a more feature-rich Grove Starter Kit. A MediaTek Cloud Sandbox service is available for IoT data collection and analytics.

LinkSprite Acadia V3

  • i.MX6 SBC with dual SD slots, SATA, GbE, and an Arduino header
  • Компания / проект - LinkSprite Technologies
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Quad (4x Cortex-A9 @ up to 1.2GHz); Vivante GC355 GPU
  • Memory — 1GB DRAM
  • Price — $119

The LinkSprite Acadia runs Ubuntu 12.04 or Android 4.4 on an i.MX6 Quad. Compared to the V2 model covered in our original report linked to above, the V3 loses the onboard eMMC flash but furnishes both a microSD slot and dual SD slots. Other features include HDMI, LVDS, SATA, audio, and GbE connections, as well as three USB ports, dual cameras interfaces, and an Arduino-compatible header.

LinkSprite Arches

  • 32-bit octa-core SBC imitates Cubieboard4
  • Компания / проект - LinkSprite Technologies
  • HardLinux report
  • Страница продукта
  • Processor — Allwinner A80 (4x Cortex-A15 @ up to 2GHz, 4x Cortex-A7 @ up to 1.3GHz); PowerVR G6230 GPU
  • Memory — 2GB DRAM; 8 Гб флэш
  • Цена - 95 долларов

The LinkSprite Arches was unveiled as the pcDuino8 in May 2014, and then arrived in beta form later in the year with its current name before going final in 2015. The Arches runs Linux or Android on an octa-core Allwinner A80 and is configured much like the A80-based Cubieboard4. The SBC is equipped with microSD, HDMI, GbE, and three USB ports (one of them 3.0 OTG), as well as WiFi, Bluetooth, and a CSI interface.

MediaTek X20 Совет по развитию

  • High-end, 96Boards form-factor showcase for deca-core MediaTek Helio X20
  • Company/project — ArcherMind (AlphaStar); MediaTek
  • HardLinux report
  • Страница продукта
  • Processor — MediaTek Helio X20 (4x Cortex-A53 @ 1.4GHz, 4x Cortex-A53 @ 1.95GHz, 2x Cortex-A72 cores @ 2.5GHz); Mali-T880 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    8 ГБ eMMC
  • Цена - $ 199

The Android focused MediaTek X20 Development Board is not only tied for being the most expensive board in the round-up, bumping up against our $200 limit, but it's also one the most powerful. Available for $199 at AliExpress , the board complies with the 96Boards CE standard, and runs Android 6.0 on MediaTek's deca-core Cortex-A53 and -A72 Helio X20 SoC. The 85 x 54mm board has the usual 96Boards 40- and 60-pin connectors plus a 16-pin analog interface. You also get WiFi, BT, GPS, HDMI, and microSD, plus dual USB 2.0 host ports and a device-only micro-USB.

MinnowBoard Turbot Dual-Core / Dual-Ethernet Dual-Core

  • Intel backed, dual-core Bay Trail Atom SBC now available in Dual-Ethernet version
  • Company/project — ADI, MinnowBoard.org
  • HardLinux report
  • Страница продукта
  • Processor — Intel Atom E3826 (2x Bay Trail @ 1.46GHz); Intel HD Graphics
  • Memory — 2GB DDR3L RAM
  • Price — $146 or $171 (Dual-Ethernet)

Built by ADI Engineering, with the support of the Intel-backed MinnowBoard.org community, the 3.9 x 2.9-inch MinnowBoard Turbot Dual replaced the CircuitCo-built MinnowBoard Max . There's also a MinnowBoard Turbo Quad-core (see item below). Prices range up to $160, but you can get the Dual for a low of $146 at Netgate . The board includes a low-speed expansion header that provides Arduino-like prototyping I/O, as well as a 60-pin high speed connector for add-on boards called Lures. Other I/O includes dual USB ports plus GbE, micro-HDMI, and SATA. Firmware support includes Debian, Ubuntu, Yocto Project, Android 4.4, and Windows 10. A long awaited Dual-Ethernet model is finally available for $171.39 at Netgate . It adds a second GbE port, as well as M.2/micro-SIM combo for WiFi, LTE, or mSATA SSD.

MinnowBoard Turbot Quad-Core / Dual-Ethernet Quad-Core

  • Quad-core Atom version of MinnowBoard Turbot with optional dual-GbE version
  • Company/project — Intel, ADI, MinnowBoard.org
  • HardLinux report
  • Страница продукта
  • Processor — Intel Atom E3845 (4x Bay Trail @ 1.91GHz); Intel HD Graphics
  • Memory — 2GB DDR3L RAM
  • Price — $190 or $196 (Dual-Ethernet)

The MinnowBoard Turbo Quad-core, which began shipping a year ago, has the same 99 x 74mm footprint as the dual-core Turbot Dual, and much the same layout and feature set. The Quad advances to the quad-core, 1.91GHz Atom E3845 from the same 22nm Bay Trail generation, and adds a heatsink, a fan, and a faster Intel I210 GbE controller. As with the Turbo Dual-core, there's a new Dual-Ethernet model that similarly adds a second GbE port and M.2 and micro-SIM slots. The MinnowBoard Turbot Dual Ethernet Quad-Core sells for $195.58 . In June 2017, ADI and Intel posted preliminary specs for a MinnowBoard 3 that was supposed to ship in Fall 2017, but has yet to reach pre-order stage. The MinnowBoard 3 features a quad-core, Apollo Lake Atom x5-E3940 clocked to 1.8GHz, along with 4GB LPDDR4, 8GB eMMC, 3x M.2 sockets, and an RPi compatible connector, among other features.

MYS-6ULX SBC

  • Compact, low-power i.MX6 UltraLight boards with optional -40 to 85°C support
  • Company/project — MYIR
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 ULL or i.MX6 UL (1x Cortex-A7 @ 528MHz or 696MHz, respectively); 2D PXP GPU
  • Память - 256 МБ оперативной памяти DDR3;
    256MB NAND
  • Price — $28.80 (i.MX6 ULL) or $31.80 (UL)

MYIR is primarily a commercial board vendor, but it has spun several open-spec hacker boards like the MYS-6ULX SBC that have crossover appeal to makers. Others include the Sitara based Rico Board and Zynq-based Z-turn boards (see farther below). The $25 to $27 MYS-6ULX offers a choice of i.MX6 UL (UltraLite) or its very similar sibling, the i.MX6 ULL. Each SBC model has its own unique super power: The i.MX6 UL version offers -40 to 85°C support instead of 0 to 70°C, and the i.MX6 ULL model features a USB-powered WiFi radio. Otherwise, the 70 x 55mm boards are identical. You get a microSD slot, Fast Ethernet port, USB host and micro-USB 2.0 OTG ports, a debug connector, and an LCD interface with optional touchscreens. The dual 20-pin expansion connectors can be used to attach an optional baseboard. The MYS-6ULX comes with an open source Linux BSP with a 4.1.15 kernel and either Debian or Yocto Project with ported Qt. There's no forum or dedicated community site, but you get full schematics, support, and extensive documentation.

NanoPC-T3 Plus

  • Upgrade to NanoPC-T3 doubles the memory and adds -40 to 80°C support
  • Company/project — FriendlyElec
  • HardLinux report
  • Страница продукта
  • Processor — Samsung S5P6818 (8x Cortex-A53 @ 400MHz to 1.4GHz); Mali-400 MP GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    16 ГБ eMMC
  • Цена - 75 долларов

FriendlyElec (AKA FriendlyARM) has replaced its NanoPC-T3 with a similar NanoPC-T3 Plus. Like the original, the T3 Plus is equipped with an octa-core S5P6818, moving up from the quad-core S5P4418 on the almost identical NanoPC-T2 , which has returned to stock at $49 . The T3 Plus doubles the RAM and flash of the T3 and adds -40 to 80°C support. It's slightly larger at 100 x 64mm, and switches one of the USB headers to a Type-A port so there are now 3x coastline USB 2.0 host ports instead of two. Like the T3, the T3 Plus supplies WiFi, BT 4.0, and a GbE port, as well as microSD and micro-USB client connections. Медиапорты включают HDMI, LVDS, LCD, MIPI-DSI, MIPI-CSI и аудио.
In place of the 40-pin RPi connector found on NanoPi boards, the NanoPC-T3 Plus provides a 30-pin GPIO header. OS support includes Android, Debian, and the Ubuntu Core 16.04 based FriendlyCore. Available images for each of the NanoPC and NanoPi boards may be found here .

NanoPC-T4

  • Powerful new SBC is world's smallest RK3399 hacker board
  • Company/project — FriendlyElec
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3399 (2x Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 at up to 1.5GHz); Mali-T860 GPU
  • Memory — 4GB DDR4 RAM; 16 ГБ eMMC
  • Цена - $ 129

The 100 x 64mm NanoPC-T4 dropped in just in time for the survey with claims to be the smallest of the new wave of Rockchip RK3399 based SBCs. It's priced in the middle of the pack when you consider the default 4GB of RAM. FriendlyElec's first Rockchip-based SBC is also its most powerful, combining the hexa-core RK3399 with advanced features like M.2 expansion, native SATA, and display interfaces including HDMI 2.0, DP, eDP, and MIPI-DSI. You also get MIPI-CSI with dual-camera support, an RPi-compatible 40-pin interface, and a 0 to 80°C operating range. Android 7.1 and Lubuntu Desktop 16.04 are both available.

NanoPi A64

  • Compact Allwinner A64 SBC is one of the cheapest 64-bit boards around
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner A64 (4x Cortex-A53 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - 20 долларов

FriendlyElec's NanoPi A64 — the first of several 64-bit quad-core NanoPi models — provides two USB host ports, a power-only micro-USB, and HDMI, MIPI-DSI, microSD, audio, and DVP camera connections. The 5V SBC offers GbE and WiFi, but no Bluetooth, and you get the NanoPi-typical 40-pin Raspberry Pi expansion header. The 64 x 60mm footprint matches that of the NanoPi M3. Images are available for Ubuntu Core and Ubuntu Mate. Like most of the NanoPi boards, the NanoPi A64 is available with a growing list of options ranging from cases to heat sinks to camera modules. As with other NanoPi and NanoPC SBCs, the prices are insanely cheap, but shipping to the US is expensive — single-unit prices range from $16 to $20 , compared to under $4 for Orange Pi boards.

NanoPi Duo

  • Tiny and insanely cheap, this quad -A7 SBC can be plugged into an optional, RPi-like carrier
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H2 + (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Memory — 256MB or 512MB DDR3 RAM
  • Price — $8 (256MB) or $12 (512MB); $18 or $22 with Mini Shield

Launched in Aug. 2017, the tiny, 50 x 25.4mm NanoPi Duo is the first of several new headless, COM-like NanoPi boards, including the more recent, 40 x 40mm NanoPi Neo Core and Core2 spins of the Neo and Neo2 SBCs (see farther below). The NanoPi Duo is similarly designed to plug into carriers and breadboards such as FriendlyElec's optional Raspberry Pi-like carrier board, called a Mini Shield. (The Duo's Mini Shield is different than that provided by the Core boards.) Unlike the Core boards, the Duo offers WiFi, a microSD slot, and a micro-USB port, qualifying it as a standalone SBC. The Allwinner H2+ based Duo supplies headers for 10/100 Ethernet, 2x USB host, audio, CVBS, and serial debug. You get 32x I/O pins via a dual-in-line interface designed to plug into the Mini Shield or any 2.55mm pitch breadboard. For an extra $3, you get an aluminum heatsink that helps the SBC withstand -40 to 80°C temperatures. The Mini Shield offers a somewhat RPi-like size, layout, and feature set, including a 10/100 Ethernet port, 4x USB 2.0 ports, a micro-USB port, a half-size mSATA interface, an audio port, and a GPIO header. The NanoPi Duo is available with FriendlyCore (Ubuntu Core) Xenial, as well as Linux 4.16 mainline.

NanoPi K1 Plus

  • RPi-like board is like a stripped down NanoPi K2, but with new camera and audio features
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Processor – Allwinner H5 (4x Cortex-A53 @ up to 1.4GHz); Мали-450 GPU
  • Память - 2 ГБ оперативной памяти DDR3
  • Цена - 35 долларов

This slightly reduced version of the NanoPi K2 (see below) switches from the K2's Amlogic S905 to a similar Allwinner H5 SoC. FriendlyElec has swapped out the K2's WiFi/Bluetooth for a 2.4GHz WiFi-only module. It also demoted the HDMI 2.0 port to an HDMI 1.4 port with 4K video throttled back to 30fps. The NanoPi K1 Plus subtracts one of the USB 2.0 host ports, leaving 3x USB 2.0 ports total along with a micro-USB OTG port with power input that fills in for the removed DC-in jack. The K1 Plus also adds some multimedia features. There's a new DVP camera interface, a mic, and a 3.5mm audio jack that also outputs CVBS signals. Другие функции такие же, в том числе 2 ГБ ОЗУ, слот microSD, разъем eMMC и порт GbE.
You also get an IR receiver, a heatsink, a debug header, and a 40-pin GPIO connector.

NanoPi K2

  • Videocentric Odroid-C2 clone that adds onboard WiFi and Bluetooth
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S905 (4x Cortex-A53 @ 1.5GHz); Мали-450 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3
  • Цена - 39 долларов

If the specs for the video-oriented NanoPi K2 look familiar, that's because they almost perfectly mimic the $46 Odroid-C2, which aside from the processor is itself a near doppelgänger of the $35 Raspberry Pi 3. The NanoPi K2, which is $5 pricier than in May, has the same quad -A53 Amlogic SoC and 85 x 56mm footprint as the Odroid-C2. It also offers similar features like 2GB RAM, 4x USB, GbE, and a 40-pin RPi-like bus. Unlike the Odroid-C2, but like the RPi 3, the NanoPi K2 adds WiFi and Bluetooth 4.0, so you don't have to use up a USB port. The Amlogic S905 with Mali 450 GPU is considerably more powerful than the RPi 3's Broadcom SoC and supports 4K @ 60fps decoding and DVFS. Android 5.1 and Ubuntu Core Xenial images are available.

NanoPi M1 Plus

  • Upgrade to NanoPi M1 adds wireless and GbE
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H3 (4x Cortex-A7 @ 1,2 ГГц);
    ARM Mali-400 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    8 ГБ eMMC
  • Price — $38

This more feature-rich update of the recently discontinued NanoPi M1 retains the Allwinner H3 but is slightly smaller at 64 x 60mm. The higher price of the NanoPi M1 Plus reflects the standard 1GB RAM and 8GB eMMC, as well as new features like WiFi, Bluetooth, a mic, and Gigabit Ethernet. One of the three USB 2.0 host ports, however, has moved to an onboard header. Other features include HDMI, DVP camera, CVBS A/V, IR, and a microSD slot, plus a 40-pin RPi header. OS options include Ubuntu, FriendlyCore Xenial, and Debian.

NanoPi M2A

  • Compact SBC is like a quad-core version of discontinued, octa-core NanoPi M3
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Processor — Samsung S5P4418 (4x Cortex-A9 @ 400MHz to 1.4GHz); “3D” GPU
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - 42 $

The NanoPi M2A, which has risen in price by $12 over the last year, essentially replaces the similarly Samsung S5P4418 driven, $25 NanoPi M2. Aside from the quad-core SoC, the NanoPi M2A is almost exactly like the recently discontinued, octa-core NanoPi M3 . The 64 x 60mm footprint, layout, and features are almost identical to the defunct M3 except for the addition of a mic and a switch from a 5V @ 2A to a 5V @ 3A input. The NanoPi M2A provides WiFi, BT 4.0, and a GbE port, plus media interfaces like HDMI, LCD, LVDS, DVP, and audio. The SBC includes 2x USB 2.0 host ports and two more USB headers plus a micro-USB port and a 40-pin RPi header. Images listed for the NanoPi M2A include Android 4.4 and 5.1, Debian 8.1, and FriendlyCore Xenial with Qt.

NanoPi Fire3

  • Super-affordable octa-core -A53 board features RTC and advanced power management
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Processor — Samsung S5P6818 (8x Cortex-A53 @ 400MHz to 1.4GHz); “3D” GPU
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - 35 долларов

In November, FriendlyElec replaced its NanoPi 2 Fire (which previously replaced the NanoPi 2) with two fiery new models: a $35 NanoPi Fire3 with an octa-core S5P6818 and 1GB RAM and a $28 NanoPi Fire2A with the same quad -A9 S5P4418 found on the defunct NanoPi 2 Fire. The two boards are otherwise identical, but unless you're buying in volume, the only reason we can see to choose the slower NanoPi Fire2A is to save on power. The chief differences between the new Fire3 and 2 Fire include a realignment of the USB 2.0 port into a vertical position, and the replacement of the HDMI port with a micro-HDMI, enabling it to sit side-by-side with the GbE and USB ports. You also get a microSD slot plus RGB LCD, DVP camera, serial debug, and a RPi 40-pin interface. The 5V board is powered by a micro-USB OTG, and there's an RTC with battery and a PMIC with dynamic voltage control. The 75 x 40mm Fire3 runs Android and Linux distros including FriendlyCore.

НаноПи Нео

  • Company/project — FriendlyElec (FriendlyARM)
  • Headless, IoT-focused quad -A7 boardlet is smaller than an RPi Zero
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H3 (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Memory — 256MB or 512MB DDR3 RAM (Neo)
  • Price — $12 or $14 (512MB)

The Neo was the first of a sub-series of tiny NanoPi boards that include the wireless enabled Neo Air, quad -A53 Neo2-LTS, and the Neo Plus2 (see below). The Neo boards are among the world's smallest and most affordable quad-core ARM SBCs. At 40 x 40mm, they occupy only 1,600 square millimeters, compared to 1,950 sq. mm for the 65 x 30mm Raspberry Pi Zero. The NanoPi Neo is equipped with microSD, USB 2.0 host, and micro-USB OTG ports, but like the other Neo variants, it lacks a display interface. You get 36 GPIO pins instead of the usual RPi connector. The board runs Ubuntu Core or Mate on the Allwinner H3.

NanoPi Neo2-LTS

  • Quad -A53 version of tiny Neo offers long-term support
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H5 (4x Cortex-A53 @ 1,2 ГГц);
    Mali-450 GPU)
  • Memory — 512MB or 1GB DDR3
  • Price — $20 or $37 (1GB)

In early 2017, the quad -A7, 40 x 40mm NanoPi Neo was joined by a 64-bit quad -A53 near twin called the NanoPi Neo2. The Neo2 was updated with a v1.1 model that added a 1GB RAM option, and it's now referred to as the Neo2-LTS to signify it is a long-term support model that will be maintained and supported as is for “as long as possible.” The Neo2 is the same as the Neo except for the faster H5 SoC, a switch to GbE from 10/100 Ethernet, two more USB headers, and the lack of a 256MB RAM option. In December, FriendlyElec launched COM versions of the Neo and Neo2 called the NanoPi Neo Core ($8) and NanoPi Neo Core2 ($25) , which are designed to work with an optional, $11, RPi-like Mini Shield carrier board. The sandwich-style design is much like the NanoPi Duo and its own Mini Shield variant except that the Core boards are true COMs rather than SBCs.

НаноПи Нео Эйр

  • Wireless version of Neo adds eMMC and a camera connector, but loses the LAN and USB ports
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H3 (4x Cortex-A7 @ 1,2 ГГц);
    ARM Mali-400 MP2 GPU
  • Память - 512 МБ оперативной памяти DDR3;
    8GB or 32GB eMMC
  • Price — $28 or $39 (32GB)

The NanoPi Neo Air is a wireless variant of the NanoPi Neo. This headless IoT board has the same 40 x 40mm footprint, and similarly runs Ubuntu Core and Mate on an Allwinner H3. The Neo Air comes standard with 512MB of RAM, and adds WiFi, Bluetooth 4.0, and a DVP camera connector. You also get 8GB eMMC, and since the launch FriendlyElec has added a 32GB eMMC option. The Air sacrifices the Ethernet port and the sole USB host port, however, leaving you only a micro-USB OTG for power and data. You can get more USB ports or a power connection via the split bank of 36 GPIO pins.

NanoPi Neo Plus2

  • As if a Neo Air mated with a Neo2, but then expanded
  • Company/project — FriendlyElec (FriendlyARM)
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H5 (4x Cortex-A53 при 1,5 ГГц);
    ARM Mali-450 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    8 ГБ eMMC
  • Price — $44

The NanoPi Neo Plus2 SBC now sells for $44, or $19 higher than its July 2017 launch price. The board combines the WiFi, Bluetooth 4.0, and 8GB eMMC of the Neo Air with the quad -A53 Allwinner H5 of the Neo2. It also boosts RAM to 1GB. It's not a Neo drop-in replacement, however, as the dimensions have grown to 52 x 40mm. Like the other Neo boards, the SBC offers a bootable microSD slot, GbE port, dual USB 2.0 host ports, and a micro-USB for 5V power. As before, you get serial debug and audio interfaces, as well as two banks of expansion connectors: a high-speed 12-pin interface and a 24-pin low-speed connector. A $7, I2C-driven NanoHAT OLED display add-on with 128 x 64-pixel resolution ships with an open source driver and NanoHAT Motor Python Library. The add-on can be stacked on any of the Neo boards, with the combo housed in an optional aluminum casing. The Neo Plus2 runs Ubuntu Core 16.04 with Linux 4.xy mainline kernel.

Odroid-C0

  • The smallest of the Amlogic-based Odroid-C boards targets IoT
  • Компания / проект - Hardkernel, проект Odroid
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S805 (4x Cortex-A5 @ 1.5GHz); Мали-450 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    optional eMMC 4.5
  • Price — $29.80 (with $1.80 Connector Pack)

Aimed at IoT and robotics, the Odroid-C0 is a smaller (65 x 56mm), somewhat stripped-down version of the Odroid-C1 and -C1+ (see below). It has the same quad-core, Cortex-A5 Amlogic SoC and offers the same Ubuntu and Android 4.4 support with GCC 4.9.2 Linux toolchain. Coastline ports are limited to a single HDMI, but an optional Connector Pack lets you solder on real-world connections for unpopulated interfaces. These include dual USB host, serial console, IR, I2S, and an RPi 40-pin interface. A battery connector with charging circuit supports an optional 3.7V Li-Po battery. Internet connectivity requires an optional WiFi dongle. As with all Odroid boards, the price includes worldwide shipping.

ODROID-С1 +

  • A Raspberry Pi lookalike with optional eMMC and full-size HDMI
  • Компания / проект - Hardkernel, проект Odroid
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S805 (4x Cortex-A5 @ 1.5GHz); Мали-450 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    дополнительный 8 ГБ eMMC
  • Цена - 35 долларов

The Odroid-C1+ upgraded the earlier and very similar Odroid-C1 with features like a full-size HDMI port, a standard heatsink, and I2S audio and micro-USB-OTG links. The C1+ has a price, footprint, and feature set that is almost identical to the original, 32-bit Raspberry Pi 2, but has a faster processor, and supports Android 4.4 in addition to Ubuntu 14.04. The C1+ is further equipped with a microSD slot and optional eMMC, as well as GbE, serial console, ADC, and a RPi-compatible 40-pin connector.

ODROID-С2

  • RPi 3 pseudo clone with 2GB RAM and up to 64GB (but no built-in WiFi)
  • Компания / проект - Hardkernel, проект Odroid
  • HardLinux report
  • Страница продукта
  • Processor — Amlogic S905 (4x Cortex-A53 @ up to 1.5GHz); Мали-450 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    дополнительный 8 ГБ eMMC
  • Price — $46

The Odroid-C2 came in seventh place out of 98 boards in our June 2017 survey. It has the same 85 x 56mm size and layout as the Odroid-C1+ and Raspberry Pi 3, but advances to a quad -A53 Amlogic S905 SoC. It's faster than the RPi 3, but there's no WiFi or Bluetooth, and the price is higher. The C2 doubles the RAM of the C1+ to 2GB and offers a choice of optional storage between up to 64GB of eMMC or an 8GB or 16GB SD 3.01 compatible UHS-1 microSD card. The Odroid-C2 can output 4K @ 60Hz video, and has almost everything the C1+ has, including GbE and HDMI ports, four USB host ports, and a 40-pin RPi connector. Images are available for Android 5.1 or Ubuntu 16.04, based on a Linux 3.14 LTS kernel.

ODROID-N1

  • New RK3399 entry boasts dual SATA III, HDMI 2.0, and the latest Android and Ubuntu builds
  • Компания / проект - Hardkernel, проект Odroid
  • HardLinux report
  • Страница продукта
  • Процессор - Rockchip RK3399 (2x Cortex-A72 при 2,0 ГГц, 4x Cortex-A53 при 1,5 ГГц);
    Mali-T860 MP4 GPU
  • Память - 4 ГБ оперативной памяти DDR3;
    гнездо eMMC
  • Price — about $110

We're gambling that Hardkernel is going to meet its promised June ship date, and that the price will be close to the estimated $110. Announced in February, the Odroid-N1 is built around a high-end RK3399 SoC with standard 4GB of RAM and storage expansion via microSD, optional eMMC 5.1, and dual native SATA III interfaces. The Odroid-N1 is further equipped with 2x USB 3.0, 2x USB 2.0, GbE, and HDMI 2.0 ports. The 99 x 99mm board also offers an RTC, PMIC, serial console interface, heatsink, and a 40-pin GPIO interface. OS support includes Android 7.1, as well as Ubuntu 18.04 or Debian Stretch 9.3 with Kernel 4.4 LTS.

ODROID-XU4

  • Versatile octa-core SBC powers multiple Odroid cluster and NAS systems
  • Компания / проект - Hardkernel, проект Odroid
  • HardLinux report
  • Страница продукта
  • Processor — Samsung Exynos5422 (4x Cortex-A15 @ 2.0GHz and 4x Cortex-A7 @ 1.4GHz); Mali-T628 MP6 GPU
  • Память - 2 ГБ ОЗУ LPDDR3;
    optional up to 64GB eMMC
  • Цена - $ 59

This 83 x 58mm Odroid-XU3 replacement came in fourth place in last year's survey. It uses the same octa-core Exynos5422 and Mali-T628 GPU as the XU3, and provides a GbE port, audio-enabled HDMI port, 2x USB 3.0 ports, and a USB 2.0 port. The XU4 has a 12-pin GPIO header in addition to a 30-pin expansion connector. Options include a USB-based SATA 3.0 module, an I/O board, and various wireless add-ons. The Odroid-XU4 ships with several versions of Android up to 7.1 Nougat, as well as Ubuntu 16.04, based on a Linux 4.14 LTS kernel. A lightweight version of the board powers a $49 Odroid-HC1 mini-PC and up to four of them can be loaded onto a $220 Odroid-MC1 cluster computer. Hardkernel recently added a stackable, single-unit Odroid-MC1 Solo version for $48. The XU4 also drives the $54 Odroid-HC2 NAS platform.

Orange Pi 2G-IOT

  • $10 board with rarely seen Cortex-A5 SoC features 2G GSM/GPRS/EDGE
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Processor — RDA RDA8810PL (1x Cortex-A5); Vivante GC860 GPU
  • Memory — 256MB LPDDR2 RAM; 500MB NAND
  • Price — $9.90

Most of Shenzhen Xunlong's Orange Pi boards have 40-pin Raspberry Pi compatible connectors and low prices that are matched with generous, under-$4 shipments to the US The Orange Pi project has been criticized for poor Linux support and HW quality issues in the past, but it appears to be improving. Linux and Android OS images available on the Orange Pi site vary widely by board. The first Orange Pi on our list is somewhat atypical. The 68 x 42mm Orange Pi 2G-IOT can withstand -10 to 65°C temperatures, and runs Android 4.4, Ubuntu, Debian, or an RPi image on a single-core, Cortex-A5 RDA RDA8810PL SoC (typically 1GHz) with an integrated 2G GSM/GPRS/EDGE baseband. The $10 board offers WiFi, BT, and a SIM card slot with 2G antenna. Other features include LCD, MIPI-CSI, and audio interfaces, as well as USB 2.0 host and micro-USB OTG ports. There's also a 40-pin RPi connector.

Orange Pi 3G-IOT

  • Android-powered 3G cellular board also offers WiFi, BT, GPS, and FM
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - MediaTek MT6572 (2x Cortex-A7 @ 1,2 ГГц);
    Mali-400 MP1 GPU
  • Memory – 512MB DDR2 RAM; 4 Гб eMMC
  • Price — $24.90

The Orange Pi 3G-IOT arrived a week ago, providing a middle ground between the Orange Pi 2G-IOT (above) and Orange Pi 4G-IOT (below). Thanks to its low-end smartphone oriented, dual -A7 MediaTek MT6572 SoC, there's built-in support for 3G GSM, WiFi, BT, GPS, and FM. The 68 x 52mm board has little in common with the other IOT branded Orange Pi boards. The modest feature set includes an LCD interface, MIPI-CSI, audio jack and mic, and USB 2.0 host and micro-USB power ports. You also get a 40-pin expansion connector. Right now, OS support is limited to Android 4.4.

Orange Pi 4G-IOT

  • 4G LTE board runs Android 8.1 on a quad -A53 SoC
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - MediaTek MT6737 (4x Cortex-A53);
    Mali-T720 MP1 GPU
  • Memory – 1GB DDR3 RAM; 8 ГБ eMMC
  • Price — $45

Despite the similar names, the new Orange Pi 4G-IOT has little in common with the lower-end Orange Pi 2G-IOT and 3G-IOT SBCs except for their integrated cellular modems, which in this case is 4G LTE. There's no Ethernet port, but you also get WiFi, BT, FM, and GPS. Orange Pi 4G-IOT типичен для многих плат Orange Pi в том, что он имеет Raspberry Pi-образный размер (85 x 55 мм) и 40-контактный разъем расширения.
An HDMI port is available along with LCD, camera, and audio connectors. Other features include 3x USB OTG host ports, a micro-USB port, an IR receiver, and fingerprint reader support. One potential drawback is the rather arcane quad -A53 MT6737 SoC. Android is still the only supported OS, although since the March launch, it's been updated to Android 8.1.

Orange Pi i96

  • The world's only Linux-based 96Boards IoT Edition board costs $9
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Processor — RDA RDA8810PL (1x Cortex-A5); Vivante GC860 GPU
  • Memory — 256MB LPDDR3 RAM; 500 МБ NAND вспышки
  • Price — $8.80

The 60 x 30mm Orange Pi i96 is the second 96Boards IoT Edition (IE) board after Seeed's BLE Carbon, and the first to run Linux. The SBC, which sells for $8.80 on AliExpress , uses the same 1GHz, Cortex-A5 based RDA8810PL SoC from RDA Microelectronics adopted by the $10, 68 x 42mm Orange Pi 2G-IOT, but without the 2G GPRS baseband. The SBC implements the “Standard Micro” IE format's 40-pin low-speed expansion connector option required by the “Extended” format, rather than the 30-pin subset used on the Carbon board. The board offers Android, Ubuntu, and Debian images. Features include WiFi/Bluetooth with external antenna, as well as microSD, USB host, and micro-USB OTG ports. There are no LCD or audio interfaces, but you get a CSI camera interface, 3x GPIO, and a 40-pin connector.

Orange Pi Lite

  • Quad -A7 board gives you WiFi, HDMI, and MIPI-CSI on the cheap
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H3 (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 512 МБ оперативной памяти DDR3
  • Price — $12

The fetchingly priced Orange Pi Lite, a WiFi variant of the Orange Pi One, offers the 1.2GHz version of the quad-core H3 SoC, compared to 1.6GHz on the Orange Pi PC. It's also limited to a half gig of RAM, and lacks an Ethernet port, but you get a second USB host port. Other features include microSD, WiFi, HDMI, MIPI-CSI, micro-USB OTG, and the usual 40-pin RPi header. Also check out the new, Allwinner H6 powered Lite 2 board below.

Orange Pi Lite2

  • Faster upgrade to the Orange Pi Lite adds WiFi-ac and BT 4.1, but loses the 40-pin link
  • Company/project — Shenzhen Xunlong
  • Страница продукта
  • Процессор - Allwinner H6 (4x Cortex-A53);
    Mali-T720 MP2 GPU
  • Memory – 1GB DDR3 RAM
  • Price — $25

The Orange Pi Lite2 arrived in early January with the same 69 x 48mm footprint and much the same layout and feature set as the Orange Pi Lite. The big change was the shift to the quad- A53 H6 SoC, which is not only faster than the H3, but offers HDR and other media-related goodies. The Lite2, which sells for about twice as much as the Lite ( $25 at AliExpress ), doubles the RAM to 1GB and switches one of the two USB host ports to USB 3.0. The Lite2 also swaps out the WiFi-only chip for a faster 802.11ac model that adds Bluetooth 4.1 and an antenna. Other enhancements include a power management unit (PMU), and an upgrade to Android 7.0. Ubuntu and Debian are also supported. The big sacrifice here is that the 40-pin header has shrunk to 26 pins.

Orange Pi One Plus

  • A high-end video SoC plus HDMI 2.0 and GbE for only $20
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H6 (4x Cortex-A53);
    ARM Mali-T720 MP2 GPU
  • Память - 1 ГБ ОЗУ LPDDR3
  • Цена - 20 долларов

The $20 Orange Pi One Plus appeared at the end of December for $20 on AliExpress . The One Plus essentially replaces the Allwinner H3-based Orange Pi One , which is still available for $10 at AliExpress . The One Plus has as an almost identical feature set, layout, and 68 x 48mm footprint as the One, and advances to Allwinner's quad-A53 H6 SoC with Mali-T720 GPU. The H6 (and One Plus) features 4K@60fps (H.264) or 6K @ 30fps (H.265) decoding, both with 10-bit HDR video processing. Other differences include a doubling of RAM to 1GB, a GbE port instead of 10/100, and HDMI 2.0a instead of 1.3. On the other hand, you're limited to an old-school 26-pin expansion connector instead of an RPi 3-compatible 40-pin link. Other features are identical, including USB host, micro-USB OTG, microSD, IR, mic, and MIPI-CSI I/O. Debian Jessie and Ubuntu have now joined Android 7.0 on the download page. A more feature-rich Orange Pi 3 Plus is said to be in the works that more fully exploits the H6 SoC.

Orange Pi PC / PC Plus

  • RPi 2 lookalikes keep it simple
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Processor — Allwinner H3 with 4x Cortex-A7 @ 1.6GHz and Mali-400 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3;
    8GB eMMC (PC Plus only)
  • Price — $15 (PC), $24 (PC Plus)

The $15 Orange Pi PC provides an Allwinner H3, a Raspberry Pi-like 85 x 55mm footprint, and RPi-compatible 40-pin expansion. It has twice the RAM of the Lite and original One models, and provides microSD, HDMI, CVBS, CSI, and 10/100 Ethernet connections. You also get 3x USB host ports and a micro-USB OTG. A newer Orange Pi PC Plus model adds 8GB of eMMC flash. A more advanced version of this design can be seen in the quad -A53 Orange Pi PC 2 below.

Orange Pi PC 2

  • Super-affordable, 64-bit upgrade to the Orange Pi PC advances to GbE
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H5 (4x Cortex-A53);
    Мали-450 MP2 GPU
  • Память - 1 ГБ оперативной памяти DDR3
  • Цена - 20 долларов

The Orange Pi PC 2, which is available for $20 at AliExpress , builds on the Orange Pi PC design, but advances to a quad -A53 Allwinner H5. The PC 2 has the same footprint, 40-pin header, and features of the PC and PC Plus. It moves up to Gigabit Ethernet, but lacks the onboard eMMC of the Plus model, depending solely on microSD.

Orange Pi Plus2 / Plus2E

  • RPi 2 lookalike also available in cheaper Plus2E model without SATA
  • Company/project — Shenzhen Xunlong
  • Страница продукта
  • Процессор - Allwinner H3 (4x Cortex-A7 @ 1.6GHz);
    Мали-400 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3;
    8 ГБ eMMC
  • Price — $49 ($42 for Plus2E)

The $49 Orange Pi Plus2 and $42 Orange Pi Plus2E run distributions including Lubuntu, Raspbian, and Android on a quad-core, 1.6GHz Allwinner H3. The 108 x 67mm SBCs provide an RPi-compatible 40-pin connector, four USB host ports, a GbE port, and WiFi. The Plus2 is further equipped with micro-USB, microSD, SATA, HDMI, CVBS, and CSI connections. The cheaper Plus2E swaps the four-port USB hub for three separate USB ports, and loses the SATA connection.

Orange Pi Prime

  • Quad -A53 board offers wireless, 2GB RAM, and extended temp support
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H5 (4x Cortex-A53);
    Мали-450 MP2 GPU
  • Память - 2 ГБ оперативной памяти DDR3
  • Price — $35.90

Like the $20 Orange Pi PC 2, the $36 Orange Pi Prime gives you a quad -A53 Allwinner H5, a 40-pin RPi header, 3x USB host ports, and micro-USB OTG, HDMI, GbE, microSD, CVBS, audio, and MIPI-CSI connections. This larger, 98 x 60mm SBC doubles the RAM to 2GB, however, and adds WiFi, Bluetooth, and extended -10 to 65°C support. Images are available for Android, Debian Desktop and Server, Ubuntu Desktop, and Arch Server.

Orange Pi R1

  • Compact, headless $14 SBC has dual 10/100 LAN ports and WiFi too
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner H2 (4x Cortex-A7 @ 1,2 ГГц);
    Мали-400 MP2 GPU
  • Память - 256 МБ оперативной памяти DDR3
  • Price — $13.90

The new Orange Pi R1 stands out by combining a tiny 60 x 45mm footprint and low price with dual 10/100 Ethernet ports, one of which is USB-based. Aimed at tiny gateways like the similarly Allwinner H2 based Orange Pi Zero boards, the headless R1 is equipped with WiFi with antenna, plus a microSD slot and micro-USB 2.0 OTG port with power input. You get a 26-pin header compatible with old RPi boards, plus GPIO, serial debug, and a 13-pin interface that includes TV out. Android 4.4, Lubuntu, Debian, and Armbian are on tap. The R1 sells for $14 on AliExpress .

Orange Pi RK3399

  • Affordable RK3399 board has high-end features like mini-PCIe, mSATA, and an HDMI input
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3399 (2x Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 at up to 1.42GHz); Mali-T860 GPU
  • Память - 2 ГБ оперативной памяти DDR3
  • Price — $109

The first RK3399 based Orange Pi can't match the low $60 to $80 price of the RockPro64, but it's still one of the more affordable RK3399 SBCs around. It sells for $109 at AliExpress and TaoBao . The Orange Pi RK3399's high-end feature set is very close to that of the Firefly-RK3399, with GbE, WiFi-ac, BT 4.1, and a wide array of display, camera, and audio features. The only major difference is that all four of its USB 2.0 connections are coastline ports. There are also USB 3.0 Type-C, HDMI 2.0, an HDMI input, DP 1.2, eDP, and 2x MIPI-DSI and -CSI. Audio interfaces include SPDIF, I2S, and a 3.5mm analog jack. For expansion you get both a 40-pin RPi style connector and a mini-PCIe slot with a mSATA support and a SIM slot. A second mSATA interface is standard. The 129 x 99mm SBC provides an array of sensors and runs Android 6.0 or Debian 9.

Orange Pi Win Plus / Win

  • RPi 3 pseudo-clones feature up to 2GB RAM and extended temp support
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Процессор - Allwinner A64 (4x Cortex-A53);
    Мали-400 MP2 GPU
  • Memory — 2GB DDR3 RAM for Win Plus (1GB on Win); optional eMMC
  • Price — $36.90 (Win Plus) or $25 (Win)

While most of the new 64-bit Orange Pi models use the Allwinner H5, the 2GB Orange Pi Win Plus and 1GB Orange Pi Win tap the older Allwinner A64, which is much the same except for its weaker Mali-400 GPU. The Win boards can run Android 6.0, Debian Server and Desktop, Raspbian Desktop and Server, and Ubuntu Desktop/Server Xenial/LXDE/XFCE. The 93 x 60mm SBCs are only slightly smaller than the similarly priced and configured, H5-based Orange Pi Prime. Like the Prime, the Win SBCs provide micro-USB OTG, HDMI, GbE, microSD, audio, MIPI-CSI, and 40-pin RPi connections. They similarly furnish WiFi and Bluetooth and offer -10 to 65°C support. Differences include a MIPI-DSI LCD interface on the Win boards in place of RCA/CVBS/AV, and the availability of 4x USB host ports instead of three. You also get optional eMMC.

Orange Pi Zero H2+ / Zero Plus 2 H3 / Zero Plus 2 H5

  • Tiny Orange Pi Zero boards target IoT with various SoCs and features
  • Company/project — Shenzhen Xunlong
  • HardLinux report
  • Страница продукта
  • Processor — Allwinner H2+ (H2+) or H3 (H3), both with 4x Cortex-A7 @ 1.2GHz with Mali-400 MP2 GPU; or Allwinner H5 with 4x Cortex-A53 @ 1.2GHz and Mali-450 MP2 (H5)
  • Memory — 256MB or 512MB DDR3 RAM (H2+); 512MB with 8GB eMMC (H3 and H5)
  • Price — $8.50 (H2+ with 256MB) $22.90 (H3), $23.90 (H5)

The Orange Zero Plus 2 H3 and Orange Pi Zero Plus 2 H5 are rev'd up versions of the Orange Pi Zero . The Zero, in turn was recently upgraded to an Orange Pi Zero H2+ , with approximately the same price and exactly the same features as the Zero, but with a slightly improved Allwinner H2+ instead of an H2. (Note that the 512MB RAM version no longer appears to be available.) All three boards have the same tiny, 48 x 46mm dimensions, but with different processors. The Orange Pi Zero Plus 2 H3 has an Allwinner H3, which adds 4K support. The Orange Pi Zero Plus 2 H5 advances to a quad -A53 Allwinner H5, which also moves up to a Mali-450 GPU. Otherwise, the H3 and H5 devices are identical and only $1 difference in price. Compared to the Zero H2+, the H3 and H5 models remove the USB 2.0 host and 10/100 Ethernet ports, as well as the mic interface. Yet, the headless Zero H2+ is limited to an AV-out interface grouped along with other I/O on its 13-pin function header, while the Zero Plus 2 H3 and H5 boards add an HDMI port and MIPI-CSI. They also add 8GB eMMC and Bluetooth 4.2, which is provided on an Ampak AP6212 module along with the previously supplied WiFi. It all looks good for low-cost multimedia, except that the H5 version could really use a 1GB RAM option.

OSD3358-SM-RED

  • High-end BeagleBone clone designed for OSD335x-SM SiP prototyping
  • Company/project — Octavo Systems
  • HardLinux report
  • Страница продукта
  • Processor — Octavo Systems OSD3358 SiP with TI Sitara AM3358 (1x Cortex-A8 @ 1GHz) with PRU MCUs; PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ;
    16 ГБ eMMC
  • Цена - $ 199

After contributing its TI AM3358 based OSD335x SiP module to the BeagleBone Black Wireless and supplying its smaller OSD335x-SM module to the PocketBeagle, Octavo has launched its own open-spec BeagleBone clone based on the OSD335x-SM. The 108 x 54mm OSD3358-SM-RED is billed as a development platform for prototyping Octavo OSD3358 SiP based devices. Unlike the BB Black Wireless, there's no WiFi/BT module, but there's a GbE port, and you get 16GB eMMC compared to 4GB on the other BeagleBones. Как и BeagleBone Green, вы получаете 4 порта USB хоста / устройства плюс порт micro-USB.
Other features include a micro-HDMI port, a pair of BeagleBone expansion connectors, a 9-axis IMU, a LiPo connector, and temperature and barometer sensors.

Parallella

  • Zynq-based SBC features parallel processing chip for clustering applications
  • Компания / проект - Адаптева, Parallella.org
  • HardLinux report
  • Страница продукта
  • Processor — Xilinx Zynq-7020 or -7010 SoC (2x Cortex-A9 @ 667MHz plus FPGA); 16-core Epiphany RISC chip
  • Память - 1 ГБ оперативной памяти DDR3
  • Price — $127 (Micro-Server with -7010); $149 (standard with -7010); $265 (standard with -7020)

Is the Parallella era coming to a close? In a farewell blog post last July, Adapteva founder Andreas Olofsson suggested he was leaving in part due to his inability to “secure enough large investors and customers to reach the critical mass needed to compete with the likes of Nvidia and Intel.” He noted, however, that the company is profitable, and boasts 10,000 customers and a lively community. That was the last entry in the once lively blog. Aimed at power-efficient server clustering applications and parallel processing research, the Parallella features a Zynq ARM/FPGA SoC running an Ubuntu based Parabuntu. But the star of the show here is the homegrown 16-core Epiphany parallel computing coprocessor. There are still boards left, although not in every configuration. The standard model, which is available at Amazon for $149 , provides microSD, GbE, micro-HDMI, and dual USB ports. Four 60-pin connectors express I/O linked to FPGA and the Epiphany chip. Digi-Key's Micro-Server version with a Zynq-7010 that omits the USB, HDMI, and expansion I/O, is available for $127 .

pcDuino8 Uno

  • Octa-core -A8 board keeps pcDuino legacy alive
  • Компания / проект - LinkSprite Technologies
  • Страница продукта
  • Processor — Allwinner H8 (8x Cortex-A7 @ 2GHz); PowerVR SGX544 GPU
  • Memory — 1GB DRAM
  • Price — $49

The pcDuino 8 Uno isn't listed on LinkSprite's main pcDuino page, suggesting the SBC might be on the way out, but a shopping page is buried on the site. The board features an octa-core Allwinner H8 clocked to 2GHz, combined with the usual pcDuino Arduino expansion. The 92 x 54mm board provides microSD, GbE, USB host, USB OTG, HDMI, audio, MIPI-CSI, and IR connections. The old Cortex-S8 based pcDuino is still available for $30.

Pepper 43R / 43C

  • Customizable Cortex-A8 SBCs feature optional 4.3-inch touchscreens
  • Company/project — Gumstix
  • Страница продукта
  • Processor — TI Sitara AM3354 (1x Cortex-A8 @ 800MHz); PowerVR SGX530 3D GPU
  • Память - 512 МБ ОЗУ
  • Цена - 169 $

The original, $250 Pepper that appeared back in 2013 has been replaced with three new models, two of which are covered here. The Pepper boards have a TI AM3354 SoC that lacks the PRU MCUs of the original AM3359 but provide a 3D-ready PowerVR GPU. The $169 Pepper 43R and 43C are very similar, but the Pepper DVI-D is sufficiently divergent to deserve its own blurb below. The Pepper 43R can drive resistive touchscreens while the Pepper 43C supports capacitive, and each are available with optional 4.3-inch Newhaven touchscreens. The 43R version also adds an 8-ch. bidirectional level shifter and a TI step-down converter. Both boards have a GbE port, microSD slot, dual micro-USB ports, a USB console port, and a TI WiLink 8 WiFi/BT 4.1 LE module. The Pepper 43 boards are further equipped with 20-pin GPIO, an audio jack, LiPo battery support, a PMIC, and LEDs. The boards can be further customized in the Gumstix Geppetto online design and manufacturing service.

Pepper DVI-D

  • HDMI-focused Cortex-A8 SBC supports online customization
  • Company/project — Gumstix
  • Страница продукта
  • Processor — TI Sitara AM3354 (1x Cortex-A8 @ 800MHz); PowerVR SGX530 3D GPU
  • Память - 512 МБ ОЗУ
  • Price — $119

The Pepper DVI-D has the same size, TI AM3354 SoC, and 512MB RAM as the Pepper 43R and 43C (see above), but with a much lower price and a different layout and purpose. Instead of supporting touchscreens, the Pepper DVI-D features an HDMI port (via DVI-D) to support HD output instead of 720p. Other features include a microSD slot, GbE port, audio jack, console port, USB host port, and dual micro-USB device ports. As with the Pepper 43 boards, images are available for Yocto, Ubuntu, and Android. A community portion of the site shared with other Gumstix developers provides projects and tutorials. Like the other Peppers, the SBC is designed with the Gumstix Geppetto DIY design service.

PICO-PI-IMX6UL

  • Rugged, sandwich-style i.MX6 UL board with RPi and MikroBus compatibility showcases Android Things
  • Company/project — Wandboard.org; TechNexion
  • Страница продукта
  • Processor — NXP i.MX6 UltraLite (1x Cortex-A7 @ 528MHz); WXGA graphics
  • Memory — 512MB DDR3L RAM; 4GB eMMC (expandable)
  • Цена - $ 69

The sandwich-style, somewhat Raspberry Pi like PICO-PI-IMX6UL is a new version of the differently configured and now defunct PICO-IMX6UL-KIT , which was itself a rebrand of the HobbitBoard. Like the PICO-IMX6UL-KIT, the PICO-PI-IMX6UL is pre-loaded with Google's lightweight, and mostly proprietary Android Things OS, but you can load other Linux distros as well. Like its progenitors, the SBC incorporates TechNexion's PICO-IMX6UL COM. The COM integrates NXP's low-power i.MX6 UltraLite (UL), plus memory, WiFi, and BT 4.0. The PICO-PI-IMX6UL carrier adds 10/100 Ethernet, a USB host port, a micro-USB debug port, an audio jack, an antenna connector, and a PMIC. There's also 24-bit TTL RGB, GPIO, an RPi-compatible 40-pin header, and connectors for the Edison carrier and MikroBus Click add-ons. The board has 0 to 60°C support, plus shock and vibration resistance. The PICO-PI-IMX6UL may not last long since the almost identical, but i.MX7 based PICO-PI-IMX7 has arrived (see below).

PICO-PI-IMX7

  • Rugged i.MX7 boardset features Android Things and offers numerous add-ons
  • Company/project — Wandboard.org; Technexion
  • Страница продукта
  • Processor — NXP i.MX7 (2x Cortex-A7 @ 1GHz); WXGA graphics; Cortex-M4 MCU
  • Memory — 512MB DDR3L RAM; 4GB eMMC (expandable)
  • Цена - $ 79

The PICO-PI-IMX7 has the same Android Things support, RPi-like, 85 x 56mm footprint, and almost all the same features of the PICO-PI-IMX6UL (see above). However, it advances to a faster and still very power efficient, dual-core i.MX7 SoC and swaps out the MikroBus connector in favor of a MIPI-CSI interface. There's also a $169 PICO-PI-IMX7-STARTKIT model that adds a camera module and a 5-inch, 800 x 480 capacitive touchscreen. A $199 PICO-PI-IMX7-STARTKIT-RAINBOW-HAT is like the regular STARTKIT but adds Pimoroni's Rainbow HAT for sensors, displays, and servo I/O.

Pine A64 / A64-LTS

  • Over-sized, $15 and up RPi 3 imitators include 2GB version with LTS support
  • Company/project — Pine64, Inc.
  • HardLinux report
  • Страница продукта
  • Processor — Allwinner A64 or R18 (A64-LTS), both with 4x Cortex-A53 cores @ 1.2GHz and Mali-400 MP2 GPU
  • Memory — 512MB, 1GB, or 2GB (A64-LTS) DDR3 RAM; optional up to 128GB eMMC on A64-LTS
  • Price — $15 (512MB), $19 (1GB), $32 (2GB A64-LTS)

This quad-core, Raspberry Pi imitator provides microSD, HDMI, Fast Ethernet, audio, dual USB 2.0 host, and micro-USB ports. The 127 x 79mm Pine A64 offers a Pi-compatible, 40-pin connector, a 14-pin Euler connector, an RTC, and -20 to 70°C support. Compared to the 512MB model, both the 1GB A64 and 2GB Pine A64-LTS models boost Ethernet to GbE, and add a touch-panel interface, MIPI-DSI and -CSI ports, plus display and camera options. The 2GB model switches to an almost identical Allwinner R18 SoC, and adds a 5-year longevity guarantee, microSD bootability, SPI boot flash, and optional, up to 128GB eMMC. Mainline Linux based distros include Android 6.0/7.1, Remix OS 2.0, Debian Jesse Mate, and Ubuntu 16.04 in Mate, Base, and minimal images. The boards are further compatible with openSUSE, Armbian, Arch, Fedora, Gentoo, and more. Pine64 also sells a SODIMM-style SoPine A64 COM featuring the guts of the Pine A64, as well as an open source Pinebook laptop based on the same A64 processor, sold for $89 (11.6-inch) or $99 (14-inch). Over the last year, Pine64 has introduced the Pine H64, Rock64, and RockPro64 SBCs (see farther below).

Сосна Н64

  • Allwinner H6 board has HDMI 2.0 plus RPi and mini-PCIe expansion
  • Company/project — Pine64, Inc.
  • HardLinux report
  • Страница продукта
  • Processor — Allwinner H6 (4x Cortex-A53 cores); Mali-T720 GPU
  • Memory — 1GB, 2GB, or 4GB LPDDR3 RAM; интерфейс eMMC
  • Price — $26 (1GB), $36 (2GB) $45 (3GB)

The Pine H64, which has the same dimensions and much the same layout as the Pine A64, went on sale in February featuring the high-end Allwinner H6 SoC, which is also found on the Orange Pi One Plus. With the help of its Mali-T720 GPU, the SoC can push out 4K@60 with HDR video over the Pine H64's HDMI 2.0 port. The board is currently out of stock — the first version came with warnings about being a bleeding edge developers version — but we imagine it will be back soon in a more stable, volume production version. Features include GbE, 2x USB 2.0, and optional eMMC and WiFi/BT ($10) Like the Pine A64, it offers Pi-compatible, 40-pin and 14-pin Euler expansion connectors, and it also adds a mini-PCIe slot. Android and Linux are supported.

PocketBeagle

  • Tiny, minimalist BeagleBone variant can be plugged into a PC's USB port for programming
  • Company/project — BeagleBoard.org
  • HardLinux report
  • Страница продукта
  • Processor — Octavo Systems OSD335x SiP with TI Sitara AM3358 (1x Cortex-A8 @ 1GHz) with PRU MCU chips and PowerVR SGX530 GPU
  • Память - 512 МБ ОЗУ
  • Price — $25

BeagleBoard.org's tiny PocketBeagle barely qualifies as an SBC thanks to its microSD slot and micro-USB port. Like the BeagleBone Blue and BeagleBone Black Wireless, it's built around an Octavo OSD335x SiP, which includes the BB Black's AM3358 SoC with PRUs and PowerVR GPU along with 512MB RAM. The 56 x 35mm PocketBeagle is about the same size as the Raspberry Pi Zero. There's no eMMC, wireless, or Ethernet port, but you can plug this COM-like board into a laptop as a USB key-fob. Это позволяет программировать устройство с помощью веб-браузера, который обеспечивает доступ к командной строке Linux и текстовому редактору.
The PocketBeagle is not a true BeagleBone clone since it lacks dual 46-pin connectors for Cape add-ons, and it has 72 pin headers instead of 92. Yet, the Debian-driven SBC should run any BB Black software that does not access the unavailable pins.

Raspberry Pi Zero

  • Tiny, $5 and up Raspberry Pi variant has mini-HDMI and dual micro-USB ports
  • Компания / проект - Фонд Raspberry Pi
  • HardLinux report
  • Страница продукта
  • Процессор - Broadcom BCM2835 (1 процессор ARM1176JZFS с частотой 1 ГГц) с двухъядерным графическим процессором FPU и VideoCore IV
  • Память - 512 МБ SDRAM
  • Price — $5 to $25 ($14 typ. config)

Even when factoring in $5 to $25 more to add various cables and adapters, the $5 Raspberry Pi Zero is still a good deal for space-constrained IoT hacking projects. The 65 x 30mm Zero upgrades the same old-school ARM11 processor found on the Raspberry Pi A+ and B+ to 1GHz speed. The COM-like SBC ships with a microSD slot, a pair of micro-USB ports, and a mini-HDMI port with audio support, as well as an unpopulated composite video header for the juicy VideoCore IV GPU. Missing are all the USB ports, DSI and CSI ports, and audio jacks found on the Pi 2 and 3.

Raspberry Pi Zero W / Zero WH

  • Wireless versions of RPi Zero now include WH model with soldered 40-pin header
  • Компания / проект - Фонд Raspberry Pi
  • HardLinux report
  • Страница продукта
  • Процессор - Broadcom BCM2835 (1 процессор ARM1176JZFS с частотой 1 ГГц) с двухъядерным графическим процессором FPU и VideoCore IV
  • Память - 512 МБ SDRAM
  • Price — $10 to $25 ($19 typ. config.); $14 base price for Zero WH

The Raspberry Pi Zero W is identical to the RPi Zero except for the addition of the same Cypress CYW43438 wireless chip found on the $35 Raspberry Pi 3, providing 802.11 b/g/n and Bluetooth 4.1 with BLE. The Zero W is available starting at only $10 but you need the same add-ons as the Zero to get real-world video and USB ports. In January, a Raspberry Pi Zero WH model arrived that adds a soldered 40-pin GPIO header to the Zero W for easier prototyping and access to the new GPIO Expander tool. The Zero WH price has dropped from $18 to $14.

Raspberry Pi 3 Model B

  • The world's most popular Linux hacker board
  • Компания / проект - Фонд Raspberry Pi
  • HardLinux report
  • Страница продукта
  • Processor — Broadcom BCM2837 (4x Cortex-53 @ 1.2GHz); Broadcom VideoCore IV GPU @ 400MHz
  • Память - 1 ГБ SDRAM
  • Цена - 30 долларов

The runaway winner of our recent surveys is still available at the same price as the faster, more feature rich new RPi 3 Model B+ (see below). Both boards typically cost $35, but MicroCenter has been running a retail store only promotion for $30 for either model. Other boards with the same RPI expansion compatibility can beat the Raspberry Pi 3 on price, performance, and features, but the comparison is far closer than it was between the earlier Raspberry Pi's and their imitators. Most of the imitators are also more open source than the RPi 3, which like its siblings does not provide complete schematics or open source licensing. Yet, if you want guaranteed Raspberry Pi add-on compatibility, the widest range of software support, and membership in a thriving community, this is still your top pick. The largely open source VideoCore CPU adds to the RPi 3's reputation as a good choice for video applications. Note that the RPi 3 Model B will likely fade with the arrival of a faster new RPi 3 Model B+ model (see below), and you can also buy a Raspberry Pi Model B 2 v1.2 for $35, but with a slower, 900MHz quad -A53 Broadcom SoC and no WiFi or Bluetooth.

Raspberry Pi 3 Модель B +

  • RPi 3 upgrade offers faster CPU, WiFi, and Ethernet
  • Компания / проект - Фонд Raspberry Pi
  • HardLinux report
  • Страница продукта
  • Processor — Broadcom BCM2837B0 (4x Cortex-53 @ 1.4GHz); Broadcom VideoCore IV GPU @ 400MHz
  • Память - 1 ГБ ОЗУ LPDDR2
  • Цена - 30 долларов

The Raspberry Pi 3 Model B+ arrived in March with the same price and much the same layout and feature set of the RPi 3 Model B, but with both major and minor improvements. There's a faster, 1.4GHz Broadcom SoC and the wireless module has advanced to precertified, dual-band 802.11ac and Bluetooth 4.2. The LAN port has moved from 10/100 to USB-powered, up to 300Mbps Gigabit Ethernet, and there's even a Power-over-Ethernet POE HAT option on the way. Other improvements include a better PMIC, a heat spreader, and 0 to 50°C support. The official price is $35, but Microcenter is offering the same retail-only $30 deal that it provides for the Model B.

Rico Board

  • Sitara based board with dual 40-pin expansion connectors
  • Company/project — MYIR
  • HardLinux report
  • Страница продукта
  • Процессор - TI AM437x (1 ядро ​​Cortex-A9 с частотой до 1 ГГц);
    PowerVR SGX530 GPU
  • Memory — 512MB DDR3 RAM (alternatively 256MB or 1GB); 4 ГБ флэш-памяти eMMC
  • Price — $99 ($139 for full kit with cables etc.)

MYIR's open-spec, 100 x 65mm Rico Board taps TI's single-core, Cortex-A9, Sitara AM437x SoC. The SBC integrates HDMI, GbE, and dual USB ports, as well as a 24-bit LCD interface that supports optional 7-inch touchscreens. You also get camera interfaces and dual 40-pin expansion connectors with support for CAN and industrial I/O.

Rockchip RK3399 Сапфир

  • Display-oriented RK3399 board offers HDMI 2.0, DP, eDP, and MIPI-DSI
  • Company/project — Vamrs
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3399 (2x Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ up to 1.42GHz); Mali-T860 GPU
  • Memory — 4GB LPDDR3 RAM; 8 ГБ eMMC
  • Price — $149 ($349 for full Excavator EVB Kit

The 115 x 105mm Rockchip RK3399 Sapphire is a consumer relaunch of a board that Vamrs built as Rockchip's official dev platform for the RK3399. It features a standard 4GB of RAM, and runs up-to-date Android 7.1, Yocto, and Debian with Linux kernel 4.4. This is a simpler board than the pricier Firefly RK3399. There's no M.2 slot, wireless, or extensive audio I/O, for example, and it has only 3x USB ports. Media features are robust, however, with HDMI 2.0, MIPI-DSI, and eDP, as well as DisplayPort via a USB 3.0 Type-C port. Other features include MIPI-CSI, GbE, and a 40-pin, RPi-compatible header. The Sapphire can be extended via an MXM 310 connector with an Excavator carrier, which is currently available only as part of a $349 Rockchip RK3399 Sapphire Excavator EVB Kit. This is also the only model currently available, but we expect the standard version to return. The full kit includes a 7.9-inch, 2048 x 1536 touchscreen with eDP-based display sub-board. The carrier adds a second USB Type-C, a second GbE, 4x more USB 2.0 host ports, PCIe x8, WiFi/BT with antennas, and more. Vamrs is also prepping a 96Boards-compatible, RK3399-based Rock960 SBC, which has plenty of documentation, but still no estimated price.

Rock64

  • RPi 3 lookalike adds USB 3.0, bootable storage, and 4K-ready HDMI 2.0
  • Company/project — Pine64
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3328 (4x Cortex-A53 @ 1.5GHz); Мали-450 MP2 GPU
  • Memory — 1GB, 2GB, or 4GB DDR3L; empty eMMC slot
  • Price — $24.95 (1GB), $34.95 (2GB), or $44.95 (4GB)

Like the Firefly-ROC-RK3328-CC SBC (AKA Libre Computer's Renegade), Pine64's Rock64 combines Rockchip's mid-range, quad -A53 RK3328 with a Raspberry Pi like 85 x 56mm footprint and expansion, plus a somewhat similar feature set. The Rock64 lacks the RPi 3's WiFi/BT module, except for an optional USB dongle, and you won't find any DSI and CSI interfaces. Кроме того, он имеет только 3 порта USB вместо четырех.
Однако один из этих трех - более быстрый порт USB 3.0, а другой - порт OTG.
The microSD slot and empty eMMC socket are bootable, and you get a GbE port and HDMI 2.0 port with 4K HDR support. The board is supported with Rockchip versions of Android 7.1, Android with Kodi 16.1, and Linux distros including Debian, Yocto, and LibreELEC.

RockPro64

  • World's cheapest RK3399 SBC has loads of display and camera links and a full-size PCIe x4 slot
  • Company/project — Pine64
  • HardLinux report
  • Страница продукта
  • Processor — Rockchip RK3399 (2x Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ 1.5GHz); Mali-T864 GPU
  • Memory — 2GB or 4GB LPDDR4; empty eMMC slot
  • Price — $60 (2GB) or $80 (4GB)

The RockPro64 briefly went on sale this Spring as the most affordable of the rash of RK3399 SBCs that are storming the market. Like the Pine H64, however, it quickly ran out of stock, and it similarly comes with a disclaimer about being an early developer release. Features include HDMI, MIPI-DSI, eDP, 2x MIPI-CSI, Parallel camera, USB 3.0, 2x USB 2.0, and DisplayPort 1.2 via a USB Type-C port. The board stands out with a full-size PCIe x4 expansion slot in addition to its 40-pin RPi-style connector. For communications, there's a GbE port and optional, $16 WiFi-ac with Blueooth 4.1 module. MicroSD and audio links are also available.

SAMA5D4 Xplained Ultra

  • Company/project — Newark Element14, Microchips
  • Developer board for Microchip's SAMA5D4 SoC offers partial Arduino compatibility
  • HardLinux report
  • Страница продукта
  • Processor — Atmel SAMA5D4 (1x Cortex-A5 @ 528MHz)
  • Memory — 512MB DDR2 RAM; 512MB NAND flash
  • Price — $107

SAMA5D4 Xplained Ultra is a collaboration between Atmel's Linux4SAM developers site and Newark Element14. The Linux-ready, IoT-focused SBC showcases Microchip's SAMA5D4 SoC, which like the earlier SAMA5D3 is limited to a single Cortex-A5 core. The SAMA5D4 adds NEON, L2 cache, and security features, and several models support 720p video. The 138 x 88mm Xplained board ships with 512MB each of RAM and NAND flash, and offers partial Arduino compatibility. You also get HDMI, Fast Ethernet, and three USB ports.

Seeeduino Cloud

  • One of the last available Linux-driven Arduino clones
  • Company/project — SeeedStudio
  • HardLinux report
  • Страница продукта
  • Processor — Qualcomm Atheros AR9331 (1x MIPS 24kc @ 400MHz); Atmel ATmega32u4 MCU @ 16MHz
  • Память - 64 МБ ОЗУ;
    16 МБ вспышки;
    32KB flash for MCU
  • Price — $70

SeeedStudio's Seeeduino Cloud is an Arduino Yun clone that may also be the only Linux-ready SBC with full Arduino compatibility remaining on the market. Arduino's Yun and other Linux-equipped SBCs like the Arduino Industrial 101 have faded away. The SBC is a variation on its Seeeduino Arduino clone, and similarly adds Arduino support and the ability to connect the company's Grove sensor and I/O add-ons. By integrating Dragino's HE computer-on-module, the Seeeduino Cloud provides a Yun-like Atheros AR9331 WiFi subsystem that runs OpenWrt Linux. Other features include 10/100 Ethernet, USB host, micro-USB, 20x DIO pins, 7x PWM channels, and 12x analog inputs. Like the Seeeduino, the Seeeduino Cloud eases the interface between Arduino firmware and complex web services, in this case via a YunBridge library that delegates all network connections and processing of HTTP transactions to the Linux machine.

Tinker Board

  • RPi 3 pseudo clone has a quad -A17 Rockchip SoC with Mali T760 GPU
  • Company/project — Asus
  • HardLinux report
  • Страница продукта
  • Процессор - Rockchip RK3288 (4x Cortex-A17 при 1,8 ГГц);
    Mali-T760 GPU
  • Память - 2 ГБ ОЗУ LPDDR3
  • Price — $59.64

Asus' Tinker Board is the first open spec hacker SBC from a major PC manufacturer. The RK3288 based SBC was also the first Rockchip-based hacker board with a Raspberry Pi style size, layout, feature set, and 40-pin connector. (It has since been followed by the Rockchip RK3388 based Rock64 and Firefly-ROC-RK3328-CC RPi lookalikes.) Compared to the RPi 3 B+, the Tinker Board offers a faster, although 32-bit, processor with a more powerful Mali T760 GPU with upscaled 4K/30fps playback and twice the RAM. The SBC is equipped with WiFi, BT 4.0, a GbE port, and 4x USB 2.0 ports. You also get microSD, micro-USB, HDMI, MIPI-CSI, and MIPI-DSI interfaces. A community site is available with a forum and schematics, 2D and 3D drawings, and other open-spec resources. In addition to Asus' homegrown, Debian- and LXDE-based TinkerOS, there are images for Android 6.01 and Armbian 5.35, plus support for Ubuntu-LXQt, Lubuntu, FlintOS, DietPi, Volumio, and Yocto. The lowest price we found was $59.64 on pre-order at Shopbit , with shipments due in mid-June. In January, Asus announced an $80 Tinker Board S model that has yet to launch. The new model is the same except that it adds 16GB eMMC, HDMI-CEC support, a smart audio jack, and improved power management.

Tritium

  • RPi lookalike comes with choice of three Allwinner SoCs
  • Company/project — Libre Computer
  • HardLinux report
  • Страница продукта
  • Processor – Allwinner H2+, H3, or H5 — 4x Cortex-A7 (H2+/H3) -A53 (H5) cores with Mali-400 MP2 (H2+/H3) or Mali-450 MP4 (H5)
  • Memory – 512MB, 1GB, or 2GB DDR3 RAM
  • Price — $20 (H2+ with 512MB), $30 (H3 with 1GB), or $40 (H5 with 2GB)

Libre Computer, which makes the Libre Computer Board (Le Potato) and Firefly's Firefly-ROC-RK3328-CC (Renegade), has fulfilled its Kickstarter orders for a Tritium (ALL-H3-CC) SBC. The board runs Ubuntu 16.04 or Android 7.1 (“Nougat”) on a choice of Allwinner H2+ (quad -A7 with HD resolution), H3 (quad -A7 with 4K), or H5 (quad -A53 with 4K). The current LoverPi pre-order prices are $11 higher than at KS but are still reasonable. Like Le Potato, Tritium has a Raspberry 3 Model B-like form factor, layout, and 40-pin expansion interface. The only difference we can see is the addition of an IR receiver. There's no mention on the pre-order page of KS add-ons such as eMMC, heatsink, and acrylic case.

Уду Нео

  • Compact, i.MX6 SoloX board taps Cortex-M4 for Arduino compatibility
  • Company/project — Udoo (Seco)
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 SoloX (1x Cortex-A9 @ 1GHz); Cortex-M4 MCU; Vivante GPU
  • Memory — 512MB DDR3L RAM (1GB on Plus version)
  • Price — $49.90 (Basic) $59.90 (Extended), $64.90 (Full)

Like the larger Udoo Quad/Dual SBCs, the IoT-focused, 85 x 59mm Udoo Neo runs Linux or Android on a Cortex-A9 based i.MX6. The Neo, however, is optimized for the single-core i.MX6 SoloX variant, tapping its Cortex-M4 MCU to mimic an Arduino. The specs differ slightly from the Kickstarter package referenced in the HardLinux link above. The Udoo Neo Basic provides Ethernet, microSD, USB host, micro-USB OTG, micro-HDMI, LVDS with touch, and a Parallel camera interface. There's also an Arduino connector, as well as GPIO, UART, CAN, PWM, I2C, and SPI interfaces. For $10 more, the Neo Extended bumps the RAM to 1GB, adds 3-axis motion sensors, and replaces Ethernet with a WiFi/Bluetooth module. The Neo Full is identical to the Extended but offers both Ethernet and wireless.

Udoo Quad / Dual / Dual Basic

  • Arduino compatible i.MX6 SBC supplies WiFi and GbE on most models and SATA on the Quad version
  • Company/project — Udoo (Seco)
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Quad or DualLite (4x or 2x Cortex-A9 @ 1GHz with Vivante GPUs); Atmel SAM3X8E Cortex-M3 MCU
  • Память - 1 ГБ оперативной памяти DDR3
  • Price — $99 (Dual Basic); $115 (Dual); $135 (Quad)

Seco's Udoo project offers three SKUs for its flagship, 110 x 85mm Udoo SBC. The Udoo Dual Basic and Udoo Dual provide the dual-core i.MX6 DualLite while the Quad has the quad-core i.MX6 with a higher-end Vivante GPU. All three boards integrate a Cortex-M3 based Arduino Due subsystem. The boards offer microSD, HDMI, LVDS with touch, audio, and CSI connections. You also get dual USB host and dual micro-USB ports, one of which is OTG. There are 76 GPIO pins in addition to the Arduino interface. The Udoo Dual adds WiFi and GbE connections, and the Quad also adds SATA.

Udoo X86

  • High-end Intel Braswell based board has M.2 and SATA III
  • Company/project — Udoo (Seco)
  • HardLinux report
  • Страница продукта
  • Processor — Intel Braswell quad-core SoCs (Advanced Plus: Celeron N3160 @ up to 2.24GHz; Ultra: Pentium N3710 @ up to 2.56GHz); Intel Gen 8-LP GPU
  • Memory — 4GB (Advanced Plus) or 8GB (Ultra) DDR3L RAM; 32GB eMMC on Advanced Plus and Ultra
  • Price — Advanced Plus $174; Ultra $267

The fully open source Intel Braswell based Udoo X86 has an extensive feature list with highlights including M.2, SATA III, HDMI, 2x DP, wireless, and GPIO. It runs Linux, Android, and Windows 7/8.1/10. All but the $267, Pentium N3710 based Ultra version of the Udoo X86 are eligible under our $200 limit. However, among the others, only the Advanced Plus version is currently in stock. It's unclear if the $125 Basic (quad-core Atom X5-E8000) and $149 Advanced (quad-core Celeron N3160) will have a life beyond Kickstarter. The 14nm fabricated Braswell SoCs range from 5-6W TDP power consumption, which is low for the x86 world.

UP доска

  • Intel Cherry Trail based Raspberry Pi lookalike offers GbE and up to 64GB eMMC
  • Company/project — Aaeon; UP Community
  • HardLinux report
  • Страница продукта
  • Processor — Intel Atom x5-Z8350 (4x Cherry Trail @ 1.44GHz/1.92GHz burst); Intel HD 400 Graphics
  • Memory — 1GB, 2GB, or 4GB DDR3L RAM; 16GB, 32GB, or 64GB eMMC
  • Price — $99 (1GB/16GB), $109 (2GB/16GB); $109 (2GB/32GB); $119 (2GB/16GB with “Cooler”); $109 (2GB/32GB); 149 долларов США (4 ГБ / 32 ГБ);
    $159 (4GB/32GB with “Cooler”); $169 (4GB/64GB)

Like the new, small-footprint UP Core version of the UP board, as well as the more powerful UP Squared, the original UP is not backed up with full schematics. Yet, the UP Community now supplies far more extensive documentation, including some schematics, as well as open source downloads, tutorials and support. The UP board runs Yocto Project, Ubuntu 16.04, Android 5.0, or Windows 10 on a quad-core, 1.44GHz/1.92GHz Atom x5-Z8350 of the 14nm Cherry Trail generation. The 85.6 x 56.5mm board not only looks like a Raspberry Pi, but it provides a 40-pin expansion bus via an Altera MAX V CPLD that is said to provide RPi 2 compatibility. The UP features 16GB eMMC, a GbE port, a USB 3.0 OTG port, 4x USB 2.0 ports, and two USB 2.0 headers. The board is further equipped with HDMI, DSI, CSI, I2S, and eDP interfaces. The prices have increased by $10 since January, at up to $169 for 4GB RAM and 64GB flash. Several configurations have more expensive SKUs with “coolers,” which are not explained but appears to refer to fan add-ons. It's unclear why the non-cooler 2GB/16GB and 2GB/32GB versions cost the same.

UP Core

  • Smaller version of UP board with up to 4GB RAM, 64GB eMMC
  • Company/project — Aaeon; UP Community
  • HardLinux report
  • Страница продукта
  • Processor — Intel Atom x5-Z8350 (4x Cherry Trail @ 1.44GHz/1.92GHz burst); Intel HD 400 Graphics
  • Memory — 1GB, 2GB, or 4GB DDR3L RAM; 16GB, 32GB, or 64GB eMMC
  • Price — $99 (1GB/16GB); 109 долларов США (2 ГБ / 16 ГБ);
    119 долларов США (2 ГБ / 32 ГБ);
    149 долларов США (4 ГБ / 32 ГБ);
    $169 (4GB/64GB)

The UP Core, which recently began shipping to the public after its 2017 Kickstarter launch, is a smaller, 66 x 56.5mm version of the UP board, and runs the same Linux, Android, and Windows software. The feature set is the same except that it offers WiFi and Bluetooth 4.0 BLE instead of a GbE port. In addition, it supplies 2x USB 2.0 headers, compared to 4x coastline USB 2.0 ports and 2x USB headers on the UP board. Like the UP board, it also has single USB 3.0 and HDMI ports. Other features include dual MIPI-CSI, eDP, I2S audio, and a 100-pin docking connector with RPi HAT compatibility. The board has the same five configurations of RAM and eMMC as the UP board, with the same prices. Last week, Aaeon announced an UP Core Plus SBC as the centerpiece of an UP AI Edge offering that includes a choice of AI-oriented add-on boards based on Intel's Cyclone 10GX FPGA or Movidius Myriad 2 VPU. The 90 x 56mm UP Core Plus is larger than the UP Core, and has a choice of three quad-core “Apollo Lake” Atom SoCs. The UP Core Plus starts at $186 on Kickstarter for a low-end version of the SBC alone, ranging up to hundreds of dollars with various add-ons. Поставки в октябре.

UP в квадрате

  • High-end Apollo Lake SBC has mini-PCIe, M.2, SATA, and a pair each of GbE and HDMI
  • Company/project — Aaeon; UP Community
  • HardLinux report
  • Страница продукта
  • Processor — Intel Celeron N3350 (2x Apollo Lake @ 1.1GHz/2.4GHz) or Pentium N4200 (4x Apollo Lake @ 1.1GHz/2.5GHz); Intel Gen9 HD 500/505 graphics; Альтера Макс 10 FPGA
  • Memory — 2GB, 4GB, or 8GB LPDDR4; 32GB eMMC 5.0, expandable to 128GB
  • Price — $149 (Celeron with 2GB/32GB), $179 (Celeron with 4GB/32GB), $239 (Pentium with 4GB/32GB), $299 (Pentium with 8GB/64GB); $339 (8GB/128GB)

The “UP2” (or “UP Squared”), which may be the most powerful hacker-friendly SBC around, began shipping to Kickstarter backers a year ago and is now generally available. The prices have all risen by $10 in 2018, and the only models that fit under our $200 limits are the two dual-core Celeron SKUs. Like the quad-core Pentium SoCs on the pricier models, these derive from Intel's “Apollo Lake” generation. The 90 x 86mm UP Squared offers 4K video encode and decode, dual GbE ports, dual HDMI outputs, a SATA interface, M.2 support, and mini-PCIe expansion. You also get eDP, dual MIPI-CSI, 3x USB host ports, a micro-USB 3.0 OTG, and both a 60-pin GPIO connector and a 40-pin interface tied to an Altera Max 10 FPGA. Поддержка ОС включает Linux (Ubuntu, Ubilinux, Yocto), Android Marshmallow и Windows 10 IoT Enterprise.
For a bit more power, you might consider LattePanda's new community-backed LattePanda Alpha ($129) and Delta ($269), which run Ubuntu and Windows 10 on Intel 7th Gen Core “Kaby Lake” chips. LattePanda Kickstarter shipments begin in June but are not included here because they lack open schematics and other maker-friendly extras.

USB Оружейная

  • Simple, security-enhanced board can also used as a USB stick computer
  • Company/project — Inverse Path (F-Secure)
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX53 (1x Cortex-A8 @ 800MHz)
  • Память - 512 МБ оперативной памяти DDR3
  • Price — $150 with USB host adapter

This tiny (65 x 19mm), Crowd Supply funded SBC for secure computing applications features TrustZone security, USB emulation, and a secure boot feature that lets users apply verification keys that ensure only trusted firmware can be executed on a specific device. The fully open source USB Armory is limited to two real-world ports — a USB 2.0 OTG port and a microSD slot — but you can extend that with the adapter. Surprisingly, this thumbdrive-style SBC supports Android, as well as Linux. The base price is $140, but a $10 host adapter is required for stand-alone rather than USB stick mode.

VoltaStream Zero

  • Homespun audio streaming board with i.MX6 ULL SoC and TI BurrBrown PCM5121 DAC
  • Company/project — PolyVection
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 ULL (1x Cortex-A7 @ 996MHz); 2D PXP GPU
  • Память - 512 МБ оперативной памяти DDR3
  • Price — $38 (32.77 Euros)

The new VoltaStream Zero is a hobbyist, open source SBC project from Berlin based developer Philip Voigt aimed at audio streaming applications. Quantities are limited, and Voigt encourages developers to use the open KICAD design files to build their own. This minimally configured board runs custom Yocto and Debian builds on NXP's low-power i.MX6 ULL, which in this case is clocked almost to 1GHz. The VoltaStream Zero ships with a TI BurrBrown PCM5121 DAC, which offers up to a 384kHz sampling rate and 106 SNR (signal-to-noise ratio). You can optionally swap that out for a pricier PCM5142 DAC with a higher 112dB SNR. A 3.5mm jack lets you output optical TOSLINK or analog audio, and there's an SPDIF header. A free WiFi dongle plugs into the sole USB host port. A micro-USB device port supports 5V power, or you can use a power header. Также есть слот для карт памяти microSD.
The board has an RPi Zero-like 65 x 30mm footprint and 40-pin connector. Voight is working on adding support for common RPi audio HATs. The board is currently out of stock.

Wandboard

  • One of the earliest open-spec Linux hacker boards showcases the i.MX6
  • Company/project — Wandboard.org; TechNexion
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX6 Solo, DualLite, or Quad (1x, 2x, or 4x Cortex-A9 @ 1GHz); Vivante GPU
  • Memory — 512MB (Solo) 1GB (Dual), 2GB (Quad and QuadPlus) DDR3 RAM
  • Price — $69 (Solo); $89 (Dual); $119 (Quad); $139 (QuadPlus)

The venerable Wandboard, a modular, sandwich-style, COM+baseboard assembly featuring a replaceable compute module, is $10 cheaper now that Wandboard.org has launched its quad -A53 i.MX8M based Wand-Pi-8M (see below). The original Wandboard received a “Reload” update in early 2017 that added the i.MX6 QuadPlus as an alternative to the Quad model, bringing an improved Vivante GC2000+ GPU and an SPDIF audio interface. The SBC's WiFi was updated to 802.11ac and Bluetooth to 4.1 BLE. There's also a new PMIC, and Wandboard.org has fixed an HDMI EDID + CEC problem. Features include dual microSD slots plus GbE, HDMI, camera, serial, USB, and USB OTG connections. The Dual lacks the Quad's SATA connection, and the Solo also foregoes the WiFi and Bluetooth found on the Quad and Dual.

Палочка-Pi-8M

  • Rugged SBC showcases i.MX8M SoC with HDMI 2.0, USB 3.0 Type-C, and a 40-pin RPi connector
  • Company/project — Wandboard.org; Technexion
  • HardLinux report
  • Страница продукта
  • Processor — NXP i.MX8M Quad(4x Cortex-A53 @ 1.3GHz); Vivante GC7000Lite GPU
  • Memory — 1GB DDR4/4GB eMMC (Lite); 2GB/8GB (Pro), 2GB/16GB (Deluxe)
  • Price — $99 (Lite); $109 (Pro); $129 (Deluxe)

TechNexion and its Wandboard.org community launched pre-sales for its i.MX8M-based Wand-Pi-8M at the end of 2017, with shipments expected by June. Unlike the Wandboards, the smaller, Raspberry Pi like (85 x 56mm) Wand-Pi-8M-Lite, Wand-Pi-8M-Pro, and Wand-Pi-8M-Deluxe, are standard SBCs rather than sandwich-style COM-and-carrier products, and they all use the same quad -A53 i.MX8M Quad. The SoC supports 4K UltraHD with HDR video @ 60fps with H.265, plus VP9 support. The i.MX8M also provides a Cortex-M4 core and a security subsystem. Aside from memory, the only difference between the three models is that the Lite lacks the WiFi-ac and Bluetooth 4.2 found on the Pro and Deluxe. Coastline ports include GbE, HDMI 2.0, USB 3.0 host, micro-USB debug, and USB 3.0 Type-C for 5V DC power input or debugging. There's also a 40-pin Raspberry Pi connector, and dual MIPI-CSI. The Wand-Pi-8M has a PMIC and shock and vibration resistance, and supports Linux, Yocto, Ubuntu, Android Oreo.

Z-образная доска

  • Built on a Zynq FPGA SoC, this SBC has a CAN interface and onboard sensors
  • Company/project — MYIR
  • HardLinux report
  • Страница продукта
  • Processor — Xilinx Zynq-7010 or -7020 (2x Cortex-A9 cores @ 667MHz, plus FPGA)
  • Память - 1 ГБ оперативной памяти DDR3
  • Price — $99 (7010) or $119 (7020), incl. Карта памяти microSD 4 ГБ

The Z-turn Board, which has now been joined by a Z-turn Lite (see below), runs Linux on a choice of two Xilinx Zynq SoCs which combine dual Cortex-A9 cores with different levels of FPGA circuitry: the Zynq-7010 (28K logic cells) or Zynq-7020 (85K). The 102 x 63mm SBC features HDMI, GbE, and dual mini-USB ports, as well as a CAN port and a variety of sensors, buzzers, switches, buttons, and LEDs. Dual 80-pin expansion connectors express the FPGA signals and can be configured as LVDS pairs. A $139 kit version adds a power adapter, cables, and a 4GB data card. There's a customized Linux 3.15 BSP.

Z-turn Lite

  • Smaller, cheaper version of Z-turn, but with lower-end Zynq options
  • Company/project — MYIR
  • HardLinux report
  • Страница продукта
  • Processor — Xilinx Zynq-7007S or -7010 (1x or 2x Cortex-A9 cores @ 667MHz, plus FPGA)
  • Память - 512 МБ оперативной памяти DDR3;
    4 Гб eMMC
  • Price — $69 (7010) or $75 (7020), incl. Карта памяти microSD 4 ГБ

Last July MYIR launched a smaller (91 x 63mm), stripped down version of its Z-turn board with a lower price. The Z-turn Lite offers a different mix of ARM/FPGA Xilinx Zynq options. The previous low-end model — the Zynq-7010 (28K logic cells) — is now the high end. The new low end is the new Zynq-7007S with 23K FPGA logic cells and only one Cortex-A9 core instead of two. You get the same Linux 3.15 BSP, but there's no longer mention of Ubuntu support. RAM has been halved, but unlike the original Z-turn, you get 4GB eMMC in addition to the 4GB microSD card that ships with both boards. The Lite reduces the number of programmable I/O lines to 84 and omits features such as the HDMI and CAN ports, as well as temperature and motion sensors. Last fall, MYIR released a $29, 91 x 63mm Z-turn Lite IO Cape designed specifically for the Lite that gives you a real-world HDMI port, as well as camera, LCD, Pmod, and GPIO interfaces.

Catalog with brief descriptions of all 116 SBCs (you are here)